Whirlpool Microwave Error F2 E3: Control Panel Circuit Problem
F2 E3 on a Whirlpool built-in microwave means the oven has detected a problem in its control panel circuit, which takes in the keypad, the board behind it and the wiring that joins them.
What does Whirlpool microwave code F2 E3 mean?
Built-in Whirlpool microwaves and microwave drawers, WMC50522AS among them, can put F2 E3 on the display in place of the normal readout. The code tells us the control panel circuit has a problem. Whirlpool lists three areas: the user interface or keypad, the control board behind it, and the wiring that links the two. No single part is named as the one that has failed. That makes F2 E3 a reason to test a circuit, and it does not condemn any particular part.
F2 E3 at a glance
- Code
- F2 E3
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwaves and microwave drawers
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Control board behind the panel that has stopped exchanging signals with the keypad
What you may notice with F2 E3
- The display shows F2 E3 instead of its usual readout
- The oven does not carry on with normal operation while the code is up
- The code may vanish after a power reset and then return later
How the microwave detects F2 E3
A built-in Whirlpool microwave has a keypad, also called the user interface, on the front and a control board behind it. The two exchange signals through a wiring harness, and the control expects those signals to arrive in a normal pattern whenever the oven has power.
When the control finds that exchange wrong, it shows F2 E3 instead of the usual readout. The guidance does not say which of the three links, the keypad, the board or the harness, upset the exchange, which is why the code reads as a circuit warning. A power reset restarts the control and gives it another chance to check the circuit. If the condition has cleared, the display returns to normal. If not, F2 E3 comes straight back.
Likely causes of F2 E3
- Control board behind the panel that has stopped exchanging signals with the keypad
- Worn or unresponsive keypad (the user interface)
- Loose or damaged harness plug between the keypad and the control
Can you keep using the microwave with F2 E3?
Not while F2 E3 is on the display. The code reports a problem in the circuit that tells the oven what to do, so the microwave cannot be trusted to answer the keypad correctly. Try the breaker reset once. If the display clears and a short cycle works, you can carry on and keep an eye on it. If F2 E3 returns, leave the microwave switched off at the breaker until it has been tested.
What you can safely check
- Make sure nothing is cooking, then switch off the microwave's breaker at the electrical panel.
- Leave it off for a full minute.
- Switch the breaker back on and read the display.
- Wait another minute; if no code shows, run a short cycle to see that the oven responds.
- If F2 E3 appears again, stop using the oven and call us, because further resets will not help.
What our technician does for F2 E3
- Check the plug connections between the keypad and the control
- Test the keypad for dead or erratic response
- Test the control board and replace it only if it proves to be the cause
How to keep F2 E3 from coming back
- Keep liquids and spray cleaner away from the keypad, and wipe it with a lightly damp cloth with the oven switched off.
- Mention a keypad that responds slowly or skips presses early, before it ends up showing a code.
Technical reference
- Code
- F2 E3
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwaves and microwave drawers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F2 E3 questions
Does F2 E3 mean the whole microwave drawer is ruined?
No. The code points to a circuit, not to the whole oven. The cause may turn out to be one connection or one board, and a test is what tells us which, and whether repair makes sense for the age of your unit.
Will the display tell me which part is wrong?
It will not. F2 E3 names a circuit made of three areas, the keypad, the control and the wiring. Only testing on the oven can separate them, so the code is a starting point for the technician.
Can I clean the keypad to clear F2 E3?
Wiping the panel with a soft, slightly damp cloth while the oven is off does no harm, but it is not a listed fix. Whirlpool's guidance gives only the breaker reset, so a returning code still needs a test.
Is F2 E3 the same as the other F2 E codes on this oven?
They sit in one family and Whirlpool gives the same breaker reset for each. The last character may mean something to a technician, though the manual lists no separate meaning, so we check on the oven.
Which details are worth having ready before we talk about F2 E3?
Read the model number off the label, quote the code as it appears, and say whether the one-minute reset cleared it even briefly. That tells us how steady the problem is.
Need help with F2 E3?
We trace the cause in your home first and write the price down before any part is swapped.