Whirlpool Built-In Microwave F2 E5: Keypad and Control Circuit
F2 E5 on a Whirlpool built-in microwave means the control found a problem on the keypad side of the oven, in the control itself, or in the wiring that ties them together.
What does Whirlpool microwave code F2 E5 mean?
F2 E5 can turn up on the display of Whirlpool built-in microwaves and drawers, model WMC50522AS for one. The control has found trouble on the keypad side of the oven, in itself, or in the harness tying the two together. Whirlpool's guidance for this code consists of a power reset and names no part. We read F2 E5 as a circuit that has to be proven link by link, and not as a signal to swap a part.
F2 E5 at a glance
- Code
- F2 E5
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwaves and microwave drawers
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- User interface or keypad no longer reporting presses correctly
What you may notice with F2 E5
- F2 E5 is on the display of the built-in microwave or drawer
- The oven control reports a problem instead of normal operation
- The code may stay away for a while after a reset, then return
How the microwave detects F2 E5
Behind the front panel of a built-in Whirlpool microwave sits a control that listens to the keypad. Presses on the pad become signals that pass through a wiring harness to the control, and the control answers by starting, stopping or changing the cycle. It expects that conversation to follow a steady pattern.
If the pattern breaks, whether from the keypad, the harness or the control itself, the oven puts F2 E5 on the display. Which of the three broke it is not something the display reveals. The brand's power reset restarts the control and lets it listen again. A conversation that returns to normal clears the code. One that stays broken brings F2 E5 back, and that is the point where testing begins.
Likely causes of F2 E5
- User interface or keypad no longer reporting presses correctly
- Control board unable to read the keypad
- Wiring harness between the keypad and the control
Can you keep using the microwave with F2 E5?
Treat the oven as out of service while F2 E5 is showing. The control cannot confirm that its keypad circuit is sound, and that circuit is how it takes your instructions. A single breaker reset is reasonable. If it clears and the short water test goes well, use the oven carefully. If F2 E5 reappears, leave the breaker off until the circuit has been tested.
What you can safely check
- With the oven empty and idle, go to the breaker panel and switch that circuit off.
- Come back after sixty seconds and switch it on again.
- Read the display, then glance at it once more after a further minute.
- If the display stays quiet, warm a cup of water for a short time to prove the oven works.
- If F2 E5 shows up again, phone us rather than resetting a second time.
What our technician does for F2 E5
- Work out which of the keypad, the board or the harness gives out first
- Check the harness plugs at both ends
- Test the keypad and the control, then replace only what is confirmed as the cause
How to keep F2 E5 from coming back
- Keep spills and steam away from the keypad by closing the door fully and wiping up splashes promptly.
- Use the keypad with a gentle touch and report any buttons that stop responding.
Technical reference
- Code
- F2 E5
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwaves and microwave drawers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F2 E5 questions
How do I reset F2 E5 myself?
Turn the microwave's breaker off, wait a minute, turn it on and keep an eye on the display for the following minute. The reset needs no tools, and it is the only step owners are given.
Is the microwave beyond saving when F2 E5 shows?
Not on the strength of the code alone. The cause may sit in one board or one connection, and we tell you plainly if the cost of repair does not look sensible for your unit.
Why not keep resetting until it works?
Repeated resets can hide a pattern. If the code keeps coming back, the circuit still has a problem that a reset cannot reach, and a proper test is the way to find it.
Could a power reset hide a real problem with F2 E5?
Yes, it could. The reset restarts the control, so a weak connection may behave for a day or two and then drop out again. A code that returns is the sign to have the circuit tested.
Does Whirlpool's warranty apply to F2 E5?
That depends on your model's age and your own warranty terms, so check your warranty terms or ask us. The code alone does not tell us whether a particular part falls under the warranty.
Need help with F2 E5?
We trace the cause in your home first and write the price down before any part is swapped.