(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Code F3T1: User Interface Thermistor

On a Whirlpool over-the-range microwave, F3T1 concerns the user interface thermistor, which senses temperature in the control panel area, and the wiring around it.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F3T1 mean?

F3T1 appears on Whirlpool over-the-range microwaves such as WMH31017HS, WMH32519HZ or WMH53521HZ. It refers to the user interface thermistor and its wiring, a temperature sensor located in the control panel area. The display carries the code, and Whirlpool's guidance is a power reset with no failed part named. We therefore treat F3T1 as a panel temperature sensor circuit that still has to be tested.

F3T1 at a glance

Code
F3T1
Appliance
Whirlpool microwave
Applies to
Whirlpool over-the-range microwave, user interface panel
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Thermistor in the control panel area

What you may notice with F3T1

  • F3T1 appears on the display at the front of the microwave
  • The microwave does not behave as normal while the code shows
  • Keys may respond, yet the code remains or returns

How the microwave detects F3T1

The control panel of an over-the-range microwave contains electronics, and a thermistor placed there lets the control keep track of the temperature in that area. A thermistor is a small part whose resistance changes with temperature, so the control can turn its signal into a reading.

The control expects a reading that makes sense. If the thermistor, the wiring that carries its signal, or the control's own input delivers something it cannot accept, F3T1 goes on the display. Whirlpool's guidance gives a power reset, which restarts the control and lets it read the thermistor again. A circuit in good order keeps the code away. A circuit with a problem brings F3T1 back, and that is the cue for testing it link by link.

Likely causes of F3T1

  • Thermistor in the control panel area
  • Lead and plug serving that thermistor
  • Control input that reads the thermistor

Can you keep using the microwave with F3T1?

Not if F3T1 comes back. Do the breaker reset once. If the display is clear and the keys and a short cycle work, you can use the microwave while watching for a repeat. A returning code means the control is reporting a problem with a panel sensor, and the microwave should stay switched off until that circuit has been tested.

What you can safely check

  1. Make sure nothing is cooking, then turn off this microwave's breaker and leave it off for a minute.
  2. Turn the breaker on again.
  3. Keep an eye on the front panel for a minute, looking for F3T1.
  4. A clear display allows a short test cycle; press a couple of keys to see that they answer.
  5. If F3T1 comes back, stop and phone us.

What our technician does for F3T1

  • Check the thermistor connection at the panel
  • Test the wiring in the panel circuit
  • Test the control, and replace only what proves to be the cause

How to keep F3T1 from coming back

  • Keep heat and steam from the range below away from the front panel by using the hood fan during cooking.
  • Wipe the front panel with a soft damp cloth only while the microwave is off.

Technical reference

Code
F3T1
Appliance
Whirlpool microwave
Control family
Whirlpool over-the-range microwave, user interface panel
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F3T1

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F3T1 questions

What is F3T1 telling me?

The control is having trouble reading the panel thermistor, or the wiring joining it to the control. It is a temperature sensor circuit code and nothing more specific.

Does F3T1 mean the same as F2E1?

No. F2E1 is about the keypad and its wiring, whereas F3T1 names the user interface thermistor. On over-the-range models each has its own first check.

Will a reset remove F3T1 for good?

A reset clears the display only. If the cause remains, the code returns, and a returning F3T1 calls for a proper test of the circuit.

Does F3T1 mean the panel is overheating?

The code says the control has a problem with the thermistor reading or its wiring. It does not tell us the panel is actually too hot. We test the circuit to find out which part is responsible.

Which facts help most if I phone about F3T1?

Have the label's model number ready, note exactly what the display shows, and check whether the keypad still answers presses. Also tell us whether the reset removed the code for any length of time.

Need help with F3T1?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair