(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Over-the-Range Microwave F3T3: Hood Thermistor Check

A Whirlpool over-the-range microwave with F3T3 on its display is reporting trouble with the hood temperature thermistor, the sensor in the vent section above the range, or its wiring.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F3T3 mean?

F3T3 appears on Whirlpool over-the-range microwaves like WMH31017HS, WMH32519HZ or WMH53521HZ when the control flags the hood temperature thermistor or its wiring. By the hood we mean the vent section of the unit above the range. Whirlpool supplies a single owner step, a power reset, and no failed part is named. For us the code gives the hood sensor circuit as our starting point.

F3T3 at a glance

Code
F3T3
Appliance
Whirlpool microwave
Applies to
Whirlpool over-the-range microwave, vent hood section
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Thermistor in the hood section

What you may notice with F3T3

  • F3T3 is showing on the microwave display
  • The microwave may stop working as it should
  • The vent fan may still respond even while the code is showing

How the microwave detects F3T3

The lower part of an over-the-range microwave is the hood, which pulls steam and cooking heat away from the range. A thermistor in that part reports its temperature to the control, using resistance that changes as the area warms or cools.

Because that section sits directly above the burners or cooktop, the control keeps an eye on its temperature through the thermistor and wiring. If the thermistor, its leads or the board input stops giving a reading the control accepts, F3T3 appears on the display. Whirlpool's guidance gives a power reset, which restarts the control. A healthy circuit stays quiet afterward, while a circuit with a problem makes the code return, and then each link has to be tested.

Likely causes of F3T3

  • Thermistor in the hood section
  • Plug and leads running to the hood sensor
  • Control board input for the hood sensor

Can you keep using the microwave with F3T3?

Reset the breaker once. If F3T3 stays away and both the microwave and the vent fan work, you can use the unit and watch for a repeat. If the code returns, stop using the microwave. The control cannot read the hood temperature, and the unit should stay off until that sensor circuit has been tested.

What you can safely check

  1. Turn off whatever is cooking below, let the unit cool, then switch the microwave's breaker off.
  2. After a minute, switch it on again.
  3. Watch for F3T3 over the next minute.
  4. A clear display lets you try a brief cycle and press the vent fan control to see that the fan answers.
  5. If F3T3 comes back, leave the unit off and call us.

What our technician does for F3T3

  • Check the hood sensor circuit
  • Test the control input, in that order
  • Replace a part only when it proves to be the cause

How to keep F3T3 from coming back

  • Run the vent fan while cooking on the range below, so heat and steam leave the hood area.
  • Clean the hood area when cool, since grease can collect around the sensor.

Technical reference

Code
F3T3
Appliance
Whirlpool microwave
Control family
Whirlpool over-the-range microwave, vent hood section
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F3T3

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F3T3 questions

Which sensor is the hood temperature thermistor?

It senses temperature in the vent hood section of the unit above the range. F3T3 means the control cannot read it properly, or its wiring has a problem.

Can heat from the cooktop below set off F3T3?

The guidance names no such cause. Allow the microwave to cool fully before trying the breaker reset. A code that returns afterward means the sensor circuit needs testing.

How serious is F3T3?

This is a temperature sensor code with no safety warning from Whirlpool. Even so, leave the microwave off while the code keeps returning, until someone has examined the sensor circuit.

Is F3T3 related to the vent fan not working?

The code names the hood temperature thermistor, not the fan. The fan may run perfectly well while the control still reports a sensor problem, so a working fan does not rule out F3T3.

What should I mention on the phone about F3T3?

Tell us the model on the label and that F3T3 is on the display. Say what was cooking below the microwave when it appeared and whether a reset removed the code. Those details guide the test.

Need help with F3T3?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair