Whirlpool Microwave Code F3T4: Magnetron Temperature Thermistor
On a Whirlpool over-the-range microwave, F3T4 relates to the temperature sensor of the magnetron, or to its wiring, so the circuit should be tested before the microwave runs again.
What does Whirlpool microwave code F3T4 mean?
On Whirlpool over-the-range microwaves like WMH31017HS, WMH32519HZ and WMH53521HZ, F3T4 concerns the thermistor that tracks magnetron temperature, or the wiring leading to it. The magnetron generates the microwave energy, and the thermistor passes its temperature along to the control. The code is shown on the display. Whirlpool offers only a power reset and no named failed part, so the sensor circuit should be tested before the oven is run again.
F3T4 at a glance
- Code
- F3T4
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool over-the-range microwave with magnetron sensor
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Thermistor monitoring the magnetron temperature
What you may notice with F3T4
- F3T4 is showing on the microwave display
- The microwave stops behaving as it normally does
- The code may come back soon after a reset
How the microwave detects F3T4
The magnetron is the part that makes the microwave energy, and it warms up while it works. A thermistor on or near it reports that temperature to the control, so the control can tell when the magnetron is running within a range it accepts.
F3T4 shows up when the control cannot rely on that report. The thermistor might read wrongly, its plug or leads might not be passing the signal, or the board might misread it. The control is blind to the magnetron temperature in that situation, which is why the code deserves caution. Whirlpool's guidance is a power reset that restarts the control. If the circuit is in order the display clears, and if it is not, F3T4 returns and the circuit needs a test before use.
Likely causes of F3T4
- Thermistor monitoring the magnetron temperature
- Plug and leads between the thermistor and the control
- Control board input that reads the thermistor
Can you keep using the microwave with F3T4?
Be careful. The sensor watches the temperature of the part that makes the microwave energy, so we advise against cooking while F3T4 is displayed. After a breaker reset, if the display is clear, a brief normal cycle is a fair test. If F3T4 returns, keep the microwave switched off at the breaker until the sensor circuit has been tested.
What you can safely check
- Do not run the microwave while F3T4 shows; let it sit idle and cool.
- Switch the breaker off for a minute, then back on.
- Watch the display for another minute for F3T4.
- If it is clear, a brief ordinary cycle is a fair test.
- If F3T4 comes back, switch the microwave off at the breaker and call us.
What our technician does for F3T4
- Test the magnetron thermistor and its connector
- Check the leads and plug
- Test the control that reads the sensor before the microwave runs again
How to keep F3T4 from coming back
- Do not run the microwave empty, which leaves the magnetron with nothing to absorb the energy.
- Keep the vent openings clear of dust and grease so the unit can shed heat.
Technical reference
- Code
- F3T4
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool over-the-range microwave with magnetron sensor
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show F3T4
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
F3T4 questions
Why does F3T4 carry a higher severity than other sensor codes?
Because the sensor watches the part that makes the microwaves, the magnetron. Whirlpool gives no safety warning, but running the oven with an unproven sensor calls for caution.
May I use the microwave once F3T4 clears?
After a successful reset and a normal cycle you may, while watching closely. Should F3T4 return, leave the unit off.
What will be tested first?
We begin at the magnetron thermistor plug, then move to the control board that interprets its signal. You hear the finding and see the written price before any repair begins.
Does F3T4 mean the magnetron has failed?
No. The code names the temperature sensor circuit and no part is named as failed. The magnetron may be perfectly sound, and a test of the thermistor, its wiring and the control shows where the problem actually sits.
Will F3T4 clear on its own?
The reset may clear the display for a while. If the sensor circuit still has a problem, the code returns, and the microwave should stay off until that circuit has been tested.
Need help with F3T4?
We trace the cause in your home first and write the price down before any part is swapped.
