Whirlpool Microwave Code F3 E0: Upper Oven Temperature Sensor
A Whirlpool built-in microwave or drawer displaying F3 E0 is having trouble with its upper oven temperature sensor. Whirlpool names the control and the wiring as other places the problem may sit.
What does Whirlpool microwave code F3 E0 mean?
F3 E0 is tied to the upper oven temperature sensor on Whirlpool built-in microwaves and drawers, WMC50522AS for example. Whirlpool lists the control and the wiring as the other places the trouble could be. The display carries the code and the oven stops running as it should. The guidance offers a power reset and does not name a failed part, so F3 E0 only shows us which sensor circuit to test.
F3 E0 at a glance
- Code
- F3 E0
- Appliance
- Whirlpool microwave
- Applies to
- Built-in microwave drawer from Whirlpool, WMC50522AS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Upper oven temperature sensor reading outside what the control expects
What you may notice with F3 E0
- F3 E0 on the display of the built-in microwave
- The oven stops running as it normally does
- The code may disappear after a reset and return when the oven is used again
How the microwave detects F3 E0
To regulate heat, the control needs to know the temperature inside the upper part of the oven. A sensor mounted there reports that temperature through wiring to the control, and the control compares the report with what it expects at that stage of a cycle.
If the report is missing, drifts or does not make sense, the control cannot regulate with confidence and shows F3 E0 on the display. The brand does not say whether the sensor, its wiring or the control input is the source, so F3 E0 points to a circuit and no single part. Switching the power off and on makes the control take a new reading. When the reading is good, the code stays off the display. When it is not, F3 E0 comes back.
Likely causes of F3 E0
- Upper oven temperature sensor reading outside what the control expects
- Wiring and connector between that sensor and the control
- Control that reads the sensor signal
Can you keep using the microwave with F3 E0?
If the reset clears F3 E0 and the oven heats normally, you can use it, though stay alert for a second appearance. Should the code return, do not use the oven. A control that cannot read its own temperature may not regulate heat correctly, and it is better to leave it off until the sensor circuit has been tested.
What you can safely check
- Make sure the oven is empty and has cooled, then turn its breaker off.
- After a minute, turn the breaker back on.
- Watch the display for a minute for F3 E0.
- When the display stays clear, run a short ordinary cycle and check that the oven warms.
- If F3 E0 returns, do not use the oven; we will test the upper sensor circuit.
What our technician does for F3 E0
- Test the upper oven temperature sensor
- Check the sensor wiring and connector
- Test the control input before replacing anything
How to keep F3 E0 from coming back
- Keep spills out of the cavity so food residue does not collect around the sensor area.
- Let the oven finish its cooling after long cycles before wiping the cavity.
Technical reference
- Code
- F3 E0
- Appliance
- Whirlpool microwave
- Control family
- Built-in microwave drawer from Whirlpool, WMC50522AS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F3 E0 questions
Which sensor is the upper oven temperature sensor?
The sensor that tells the control how warm the upper oven is. If F3 E0 shows, that reading has a problem, so the job is checking a circuit and not automatically replacing a part.
What separates F3 E0 from F3 E1?
F3 E0 concerns the upper oven sensor and F3 E1 the lower one. They share a one-minute breaker reset, and the circuit we test is the one for the code on your display.
Is the oven safe to use if F3 E0 clears?
Once the code is gone and the oven runs normally, using it is reasonable. Should F3 E0 return, stop and have the oven checked, because the control is flagging a temperature problem.
Can F3 E0 point to a real heating problem?
It can mean the control is not getting a trustworthy temperature reading, which affects how it regulates heat. Whether the heating itself is wrong cannot be told from the code, so we test the sensor circuit.
What details should I have ready if we talk about F3 E0?
Your model number from the label, the exact code on the display, and whether the oven was heating at that moment. If a reset cleared the code, say for how long.
Need help with F3 E0?
We trace the cause in your home first and write the price down before any part is swapped.