Whirlpool Drawer Microwave F8 E4: Sensor in the Exhaust Airstream
F8 E4 on a Whirlpool built-in unit points at the sensor that reads how warm the exhaust air is, or at the wires leading from it.
What does Whirlpool microwave code F8 E4 mean?
Whirlpool's WMC50522AS and kindred built-in microwaves and drawers can show F8 E4, which names the sensor in the exhaust fan airstream and its wires. Unlike the cooling group from F8 E0 through F8 E3, this one is about reading the temperature of air leaving the unit. The microwave stops its function while it shows. Treat it as a report from a circuit, not a verdict on the sensor.
F8 E4 at a glance
- Code
- F8 E4
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool microwave drawer exhaust sensor code, WMC50522AS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- The sensor measuring exhaust air temperature
What you may notice with F8 E4
- F8 E4 shows on the display
- The microwave stops partway through its function
- The message returns after a reset
How the microwave detects F8 E4
As a microwave works, its cooling fan blows air out of the unit, and a sensor in that exhaust stream measures how warm the air is. This tells the control whether heat is being carried away properly.
The sensor sends its reading along wires to the control. F8 E4 is raised when the reading is missing, fails to change as it should, or lands outside the expected range. A damaged sensor, a loose connector and a control input that misreads the signal can all produce it, and the control cannot choose between them from the inside. Rather than run a cycle without a trustworthy temperature, it stops the function. If a reset removes the code, the reading was probably a one-time glitch. If it returns, the circuit needs to be tested.
Likely causes of F8 E4
- The sensor measuring exhaust air temperature
- Wires and plugs in the sensor line
- The control input that reads the exhaust temperature
Can you keep using the microwave with F8 E4?
If F8 E4 disappears after a reset and a regular cycle heats as it should, you can use the microwave while watching for a repeat. A returning code means stop. The control is working without a dependable exhaust temperature, which is the reading that tells it whether heat is leaving. Leave the breaker off, and do not try to reach the sensor yourself.
What you can safely check
- Cut power at the microwave's breaker, and let the unit cool if you were cooking.
- Wait a minute, then restore power.
- Watch the display for a minute for any sign of F8 E4.
- A calm screen invites a regular cycle, so you can see the unit heats and responds.
- If F8 E4 comes back, leave the unit off and phone us.
What our technician does for F8 E4
- Set the sensor signal beside what the control expects
- Check the sensor wires and plugs
- Replace a part only after the circuit test
How to keep F8 E4 from coming back
- Keep the exhaust and vent openings clear so the sensor reads real airflow.
- Give the unit a rest between long cooking runs so the exhaust air can cool.
Technical reference
- Code
- F8 E4
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool microwave drawer exhaust sensor code, WMC50522AS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F8 E4 questions
What does the exhaust sensor do?
It measures how warm the air leaving the unit is. F8 E4 says that sensor, or the wires from it, is reporting trouble, and a circuit test shows which of them is responsible.
Does F8E5 mean the same as F8 E4?
The sensor is the same but the unit styles differ. Built-in units display F8 E4, and the cousin code F8E5 turns up on both built-in and over-the-range microwaves.
Should the unit stay off?
When the message comes back after a reset, yes, until a check is done. Temperature is involved, and confirming the circuit before more cooking is the cautious path.
Could a blocked fan trigger F8 E4?
The code names the sensor reading rather than the fan, but a restricted air path can change what the sensor reads. We look at airflow around the unit as part of the test.
Will F8 E4 clear by itself?
A passing glitch can clear after a power reset and stay away. If F8 E4 returns, the sensor circuit is still reporting a problem and should be tested rather than ignored.
Need help with F8 E4?
We trace the cause in your home first and write the price down before any part is swapped.