(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Code F4 E6: Wave Guide Temperature Sensor

The wave guide temperature sensor, or its wiring, is what F4 E6 refers to in a Whirlpool built-in microwave or drawer, a circuit that needs testing before the oven goes back into use.

Stop using it until checkedChecked November 2026

What does Whirlpool microwave code F4 E6 mean?

Built-in Whirlpool microwaves and drawers, WMC50522AS for one, show F4 E6 when the control has trouble with the wave guide's temperature sensor or the wiring to it. A wave guide is the channel that delivers microwave energy from the magnetron to the cooking space, and this sensor monitors how hot that channel becomes. Whirlpool lists only a power reset, with no failed part named, so F4 E6 needs a sensor circuit test before the oven goes back into use.

F4 E6 at a glance

Code
F4 E6
Appliance
Whirlpool microwave
Applies to
Whirlpool built-in microwave wave guide sensor, WMC50522AS
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
Temperature sensor on the wave guide

What you may notice with F4 E6

  • The display reads F4 E6 and the oven stays idle
  • The oven does not run normally while the code is on
  • The code may return soon after the power reset

How the microwave detects F4 E6

Microwave energy made by the magnetron reaches the cooking space through the wave guide, a channel that warms as the oven works. A temperature sensor on that channel reports to the control through a lead and plug.

The control keeps the reading inside a range it accepts. If the sensor gives a value outside it, if the lead or plug interrupts the signal, or if the control's own input misreads a good one, F4 E6 is displayed and the oven stops working normally. Since the sensor monitors heat in the path of the microwave energy, the control treats the code seriously. Whirlpool's reset removes power and brings it back, so the control reads the sensor again. If the circuit is in order, the display clears. If not, F4 E6 returns and the oven should rest until the circuit has been tested.

Likely causes of F4 E6

  • Temperature sensor on the wave guide
  • Lead and plug serving that sensor
  • Control board input that reads the sensor

Can you keep using the microwave with F4 E6?

Be cautious. The sensor behind F4 E6 watches the temperature of the path that carries microwave energy, so we would not cook with it unproven. After one breaker reset, if the display is clear and a brief cycle works, you may use the oven and watch it closely. If F4 E6 returns, leave the microwave switched off until the wave guide sensor circuit has been tested.

What you can safely check

  1. Leave the microwave idle and let it cool, then cut power at its breaker for sixty seconds.
  2. Restore power.
  3. Watch the display for another minute.
  4. If F4 E6 is absent, try a brief cycle.
  5. If it returns, keep the oven off and call us.

What our technician does for F4 E6

  • Test the wave guide temperature sensor and its plug
  • Check the wiring to the control
  • Test the control input before the oven runs again

How to keep F4 E6 from coming back

  • Do not run the microwave empty, since the energy then has nothing in the cavity to absorb it.
  • Keep the vents clear so the unit can shed heat while it works.

Technical reference

Code
F4 E6
Appliance
Whirlpool microwave
Control family
Whirlpool built-in microwave wave guide sensor, WMC50522AS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F4 E6 questions

How would you describe the wave guide?

It is the passage that guides the microwave energy produced by the magnetron into the oven cavity. When F4 E6 shows, the control is unhappy with the temperature sensor watching that passage.

Should I read F4 E6 as a safety warning?

Whirlpool does not describe it that way. The sensor does monitor heat in the path of the microwave energy, so we would not run the oven if the code comes back.

What should I do until the oven is checked?

Keep the microwave unused or the breaker off, leave the door closed, and keep the model number from the label handy. The sensor circuit is what gets tested first.

Is F4 E6 related to the inverter codes?

No. The inverter codes name the power supply that feeds the magnetron, while F4 E6 names a temperature sensor on the wave guide. Each has its own first checks.

Will F4 E6 clear on its own?

A reset may clear the display, but the cause stays if it is real, and the code returns. A repeat is the reason for testing the sensor circuit instead of resetting again.

Need help with F4 E6?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair