(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Error F3T2: Convection Thermistor Circuit

F3T2 on a Whirlpool over-the-range microwave with convection concerns the thermistor that reports temperature during convection heating, or the wiring leading to it.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F3T2 mean?

Models WMH31017HS, WMH32519HZ and WMH53521HZ are among the Whirlpool over-the-range microwaves with convection that display F3T2 when the convection thermistor or its wiring has a problem. This sensor reports temperature during convection heating, and its electrical resistance shifts as it warms. The guidance consists of a power reset, with no failed part named. For us the code shows which sensor circuit to test.

F3T2 at a glance

Code
F3T2
Appliance
Whirlpool microwave
Applies to
Whirlpool over-the-range convection microwaves, WMH31017HS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Thermistor used in convection heating

What you may notice with F3T2

  • F3T2 is shown on the display
  • The microwave stops behaving the way it normally does
  • The code may return when convection heating is used again

How the microwave detects F3T2

Convection heating moves hot air through the cooking space, and the control needs to follow its temperature. The convection thermistor does that job. Its resistance shifts as the air warms and cools, and the control translates the shift into a reading through the thermistor lead and plug.

F3T2 is shown when the control cannot get a sensible reading from that circuit. The thermistor could be giving a wrong value, the lead or plug could be interrupting the signal, or the control board could be misreading a good one. The brand's reset restarts the control and gives it fresh data. If the circuit is in order, the display clears. If it is not, F3T2 returns and testing the sensor circuit becomes the next step.

Likely causes of F3T2

  • Thermistor used in convection heating
  • Wire lead and plug serving that thermistor
  • Control board input for the sensor

Can you keep using the microwave with F3T2?

Treat the microwave with care. If the breaker reset clears F3T2 and a short cycle works, you may use it while staying alert for a second appearance. If the code returns, stop using the microwave. The control is reporting a sensor problem, and it should stay off until the convection sensor circuit has been tested.

What you can safely check

  1. Let the microwave cool, then shut off the circuit breaker, give it sixty seconds, and switch it back on.
  2. Check the display straight away.
  3. Look again after a minute.
  4. If F3T2 has not returned, run a short cycle to confirm the microwave operates.
  5. If it has, we can test the convection sensor circuit.

What our technician does for F3T2

  • Check the thermistor connection and its reading
  • Test the control that reads it
  • Explain the result before any repair

How to keep F3T2 from coming back

  • Keep the cavity free of baked-on spills, wiping it when it has cooled and the microwave is switched off.
  • Take care not to knock or bend anything fixed inside the cavity while cleaning.

Technical reference

Code
F3T2
Appliance
Whirlpool microwave
Control family
Whirlpool over-the-range convection microwaves, WMH31017HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F3T2

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F3T2 questions

What does the convection thermistor do?

It senses temperature when the microwave heats with convection. F3T2 means the control has a problem with that sensor or its wiring.

Is regular microwaving possible while F3T2 is on the display?

Whirlpool does not say. The code relates to the convection sensor, yet the control is reporting a problem, so stop using the microwave if it comes back after the reset.

What would you look at first?

The thermistor connection and its reading, since the code names that part. After that we test the control that reads it, and explain the result before any repair.

Does F3T2 only matter when I use convection?

The code is tied to the convection sensor circuit, but the control reports the problem on the display regardless of the mode. Whether regular microwaving is affected is not stated, so we test the circuit and tell you what we find.

Will F3T2 go away if I wait?

Waiting does not repair a sensor circuit. A reset may clear the display, but if the cause is still present, F3T2 comes back, and then a test is the sensible next step.

Need help with F3T2?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair