Whirlpool Microwave F3H: Humidity Sensor or Thermistor Circuit
F3H points to a humidity sensor on Whirlpool built-in units and drawers, and to a thermistor that measures humidity on over-the-range ones, or to the wiring for either.
What does Whirlpool microwave code F3H mean?
F3H is read differently depending on the Whirlpool microwave style. A built-in microwave or drawer, WMC50522AS for one, uses it for the microwave humidity sensor or its wiring. An over-the-range model such as WMH31017HS, WMH32519HZ or WMH53521HZ uses it for the humidity thermistor, or for the wires leading to it. Either way F3H sits on the display, Whirlpool offers a power reset, and no failed part is named.
F3H at a glance
- Code
- F3H
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in and over-the-range microwaves
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Humidity sensor in a built-in microwave or drawer unit
What you may notice with F3H
- F3H shows on the microwave display
- Automatic cooking features may not work normally
- The code may return after a reset
How the microwave detects F3H
Automatic cooking features need the control to know how much moisture is rising out of the food. A humidity sensor, or on over-the-range models a humidity thermistor, passes that information to the control through wiring and a plug.
The control expects a believable signal from that sensor. When the signal is missing or does not make sense, because of the sensor, the wiring or the control's own input, it shows F3H. The part differs by microwave style, so the first job is to identify which one you have. Whirlpool's guidance is only a power reset, which restarts the control. If the sensor circuit is sound afterward, the code stays off the display. If it is not, F3H returns.
Likely causes of F3H
- Humidity sensor in a built-in microwave or drawer unit
- Humidity thermistor in an over-the-range microwave
- Lead and plug for the humidity sensing part
- Control input that reads the humidity signal
Can you keep using the microwave with F3H?
If the reset clears F3H and a short normal cook goes well, the microwave is fine to use while you stay alert for a second appearance. The guidance does not say how the microwave behaves with this code showing, and since the control reports a sensor problem, play it safe. If F3H keeps returning, switch the microwave off at the breaker and leave it until the sensor circuit has been tested.
What you can safely check
- Make sure the microwave is not heating, then switch the breaker that serves it off.
- Wait a minute and switch it back on.
- Read the display, then look again over the following minute for F3H.
- If the display is clear, a brief ordinary cook shows whether the microwave works.
- If the code returns, the humidity sensor circuit needs testing and we can do that.
What our technician does for F3H
- Identify whether it is a built-in or an over-the-range model
- Test the humidity circuit that matches your style of microwave
- Check the wiring and the control input before replacing a part
How to keep F3H from coming back
- Wipe moisture and cooking splatter from the cavity after use, with the microwave switched off.
- Use a loose cover on dishes so heavy steam does not condense on and around the sensor.
Technical reference
- Code
- F3H
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in and over-the-range microwaves
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show F3H
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
F3H questions
Does F3H mean the same thing on every Whirlpool microwave?
In both styles it concerns humidity sensing, but the part differs. Built-in microwaves and drawers use a humidity sensor, whereas over-the-range models use a humidity thermistor.
What is the humidity sensor for?
It helps the control follow humidity inside the cooking space so automatic features can work. F3H means the control cannot read it properly, or the wiring leading to it is at issue.
Will food still heat while F3H is displayed?
The guidance does not say. Because the control is flagging a sensor problem, use caution, and stop using the microwave if the code keeps coming back.
Do I need to know which microwave style I have for F3H?
It helps. The model number tells us whether yours is a built-in unit or an over-the-range model, and that decides which sensor we test. It is on the label, so it is worth reading out when you call.
Can a humid Florida kitchen cause F3H?
The brand does not list humidity in the room as a cause. The code concerns the sensor circuit. If F3H returns after a reset, the circuit needs testing, whatever the weather is like.
Need help with F3H?
We trace the cause in your home first and write the price down before any part is swapped.
