Whirlpool Built-In Microwave F4 E5: Weight Sensor Circuit
Whirlpool's built-in microwaves and drawers use F4 E5 for the weight sensor, which the oven uses to gauge the load during automatic cooking, or for the wiring to that sensor.
What does Whirlpool microwave code F4 E5 mean?
Built-in Whirlpool microwaves and drawers such as WMC50522AS can display F4 E5 when the weight sensor or its wiring gives the control trouble. For automatic features, the oven relies on that sensor to judge the load. Whirlpool's only step is a power reset, and the code is not proof that the sensor has died, so F4 E5 marks a sensor circuit worth checking.
F4 E5 at a glance
- Code
- F4 E5
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwave weight sensor, WMC50522AS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Weight sensor the oven uses to judge the load
What you may notice with F4 E5
- F4 E5 replaces the usual readout on the oven display
- The oven stops running its usual functions
- The code may come back after the power reset
How the microwave detects F4 E5
Some automatic cooking features need an idea of how much food is in the oven. A weight sensor supplies that, and its signal travels by a wire and plug to the control.
The control expects a steady, believable weight signal whenever the oven is powered. If the sensor drifts out of range, the lead or plug interrupts the signal, or the control input misreads it, the display shows F4 E5. The guidance does not say which one it is. Taking everything out of the cavity before the reset gives the control a clean starting point, and the power cycle makes it read the sensor afresh. A sound circuit lets the display clear. A circuit with a problem makes the code return, and then the signal is checked with the oven empty.
Likely causes of F4 E5
- Weight sensor the oven uses to judge the load
- Wire and plug serving the sensor
- Control input reading the weight signal
Can you keep using the microwave with F4 E5?
Possibly, once the code has cleared. F4 E5 concerns the weight sensor, so manual cooking may still work after the breaker reset, but the control is reporting a problem and the guidance does not say how the oven behaves. Empty the cavity, reset once, and try a cup of water. If it runs normally, carry on with care. If F4 E5 keeps coming back, leave the oven off until the circuit has been checked.
What you can safely check
- Remove everything from the cavity, close the door and switch off the microwave's breaker.
- Wait sixty seconds, then restore power.
- Look at the display for F4 E5 over the following minute.
- If the display is clear, warm a cup of water in a short cycle.
- Should F4 E5 return, give us a call.
What our technician does for F4 E5
- Read the weight sensor signal with the oven empty
- Compare it with what the control expects
- Check the connector and wiring, then the control
How to keep F4 E5 from coming back
- Place dishes in gently and avoid overloading the oven cavity.
- Keep the cavity clean and dry so spills do not reach connectors near the sensor.
Technical reference
- Code
- F4 E5
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwave weight sensor, WMC50522AS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F4 E5 questions
Why does the oven have a weight sensor?
The oven uses it to estimate how heavy the food is, which automatic features need. F4 E5 means the control has a problem reading the sensor or its wiring.
Can food left inside cause F4 E5?
Whirlpool lists no such cause. Emptying the cavity before the reset is a sensible precaution, though the code itself points at the sensor circuit.
May I still cook by hand with F4 E5?
Only when the display has cleared after the reset and the microwave runs as it should. If the code keeps returning, leave the oven unused until the sensor circuit has been examined.
Does F4 E5 mean the oven cannot be used at all?
The code does not say that. It reports a weight sensor circuit problem, which may affect automatic features. Whether manual cooking still works is not stated, so we test the circuit and suggest caution until then.
Will F4 E5 clear on its own?
Possibly for a while after a reset. If the sensor circuit still has a problem, the code returns, and a repeat tells us the circuit should be measured with the oven empty.
Need help with F4 E5?
We trace the cause in your home first and write the price down before any part is swapped.