Whirlpool Microwave Code F4E9: Smart Pop Control Circuit
A Whirlpool over-the-range microwave that shows F4E9 is flagging the Smart Pop control, or the wiring leading to it, which the brand lists as a separate control on these models.
What does Whirlpool microwave code F4E9 mean?
Over-the-range Whirlpool microwaves in the WMH31017HS, WMH32519HZ and WMH53521HZ group can show F4E9 when the Smart Pop control or its wiring has a problem. Whirlpool lists that control as a separate part on these models. With the code on the display, the guidance is a power reset and no failed part is named. We see F4E9 as a control circuit to test, and it is not a confirmed bad board.
F4E9 at a glance
- Code
- F4E9
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool over-the-range microwave Smart Pop control
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- The Smart Pop control itself
What you may notice with F4E9
- F4E9 appears on the display of the over-the-range microwave
- The microwave may not carry on as usual
- The code may return after a breaker reset
How the microwave detects F4E9
On these over-the-range microwaves the Smart Pop control is a control of its own, joined to the main control by a connector and wiring. The main control watches that link whenever the microwave has power and expects clean signals from it.
If the Smart Pop control stops answering properly, if its connector or wire breaks the link, or if the main control misreads a good signal, F4E9 appears on the display. The guidance does not say which of those is responsible. A breaker reset restarts the main control so that it checks the link again. When the link is sound the display stays clear. When it is not, the code returns, and the connection is checked first, followed by the control itself.
Likely causes of F4E9
- The Smart Pop control itself
- Connector or wire leading to the Smart Pop control
- Main control board that reads the Smart Pop signal
Can you keep using the microwave with F4E9?
Not while F4E9 is displayed. The guidance does not say whether other functions still work, and the control is reporting a problem it cannot clear by itself. After one breaker reset, if the display stays clear and a short cycle works, you can use the microwave and keep watch. If F4E9 returns, leave it unused until the Smart Pop circuit has been checked.
What you can safely check
- Stop any cooking and, at the panel, switch off the microwave's breaker for a minute.
- Switch it on again.
- Keep an eye on the display for F4E9 for another minute.
- If the display is clear, try a brief normal cycle.
- If F4E9 shows again, do not use the microwave, and phone us.
What our technician does for F4E9
- Check the Smart Pop control's connection
- Test the control itself
- Test the main board that reads it
How to keep F4E9 from coming back
- Press the microwave's controls gently and keep spills away from them.
- Wipe the front controls only with a lightly damp cloth, with the microwave switched off.
Technical reference
- Code
- F4E9
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool over-the-range microwave Smart Pop control
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show F4E9
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
F4E9 questions
Which control is the Smart Pop control?
A separate control that Whirlpool includes on these over-the-range microwaves. When F4E9 appears, the main control has trouble with it or the wires behind it, so we test that control first.
Can the other functions still be used with F4E9 showing?
The guidance gives no answer. Because the control is reporting trouble, we suggest leaving the microwave unused until it has been examined, should F4E9 come back after the reset.
Is F4E9 the same as F4 E9 on built-ins?
No. The spaced F4 E9 on built-in models concerns the microwave inverter. The unspaced F4E9 is the over-the-range code and refers to the Smart Pop control.
Does F4E9 mean the board is bad?
No. The code names the Smart Pop control and its wiring as the area to test, and nothing in the guidance calls any part failed. We test the connection before the board.
Will F4E9 clear by itself?
The reset may clear it for a while, but if the circuit still has a problem the code comes back, and a repeat means testing.
Need help with F4E9?
We trace the cause in your home first and write the price down before any part is swapped.
