(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Error F6: Oven Control or Relay Control Board

On a Whirlpool microwave, F6 points to the oven control in built-in units and drawers, and to the relay control board in over-the-range models, or to the wiring for either.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F6 mean?

What F6 means depends on the Whirlpool microwave style. A built-in microwave or drawer, WMC50522AS for one, uses F6 for the oven control or its wiring. Over-the-range models, among them WMH31017HS, WMH32519HZ and WMH53521HZ, use F6 when a function could not be carried out; Whirlpool names the relay control board or its wiring there. Both styles put F6 on the display, and Whirlpool lists a power reset with no named part.

F6 at a glance

Code
F6
Appliance
Whirlpool microwave
Applies to
Whirlpool built-in and over-the-range microwaves
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Oven control board in a built-in unit or drawer

What you may notice with F6

  • F6 appears on the display of the microwave
  • On an over-the-range model a function may fail to finish
  • The code may return after the breaker reset

How the microwave detects F6

Both styles of Whirlpool microwave rely on a control board to run the cooking functions, but the board differs. A built-in microwave or drawer uses the oven control. An over-the-range model uses a relay control board, which switches the parts needed for a function.

F6 is displayed when that board, or the wiring and plugs serving it, cannot do its job. On an over-the-range model the function may simply fail to complete. The display does not say whether the board or a connection is responsible. A power reset restarts the board and gives it another try. If the board and wiring are sound, the display clears. If not, F6 returns, and the first job is to identify your style of microwave so the matching circuit is tested.

Likely causes of F6

  • Oven control board in a built-in unit or drawer
  • Relay control board in an over-the-range model
  • Plugs and wires reaching the board

Can you keep using the microwave with F6?

Not while F6 is showing. A control board that reports its own problem should not be asked to run cooking cycles. One breaker reset is reasonable. If the display clears and a short cycle works, you can carry on and watch for another appearance. If F6 returns, switch the microwave off at the breaker and leave it until the matching control or relay circuit has been tested.

What you can safely check

  1. With the microwave idle, cut power at its breaker for sixty seconds.
  2. Restore power.
  3. Look for F6 on the display over the next minute.
  4. If the display stays clear, a short cycle shows whether the microwave works.
  5. If F6 returns, stop using the microwave and call us.

What our technician does for F6

  • Find out which style of microwave it is
  • Test the matching control or relay circuit
  • Check the wiring and connectors

How to keep F6 from coming back

  • Keep liquids and cleaner sprays away from the microwave's controls and vents.
  • In Tampa Bay storm season, switching the microwave off at the breaker during close lightning is a cheap precaution for its electronics.

Technical reference

Code
F6
Appliance
Whirlpool microwave
Control family
Whirlpool built-in and over-the-range microwaves
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F6

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F6 questions

Does F6 point to the same board on both styles?

Not exactly. Each style has its own board behind the code: the oven control in built-ins and drawers, the relay control board in over-the-range microwaves.

What does it mean that the oven was unable to carry out a function?

On over-the-range models, a function can start and then fail to complete. Whirlpool lists the relay control board and the wiring serving it for that situation.

Is repair sensible on an older microwave?

Age and cost decide it. We tell you honestly if a repair is not worth it, and you see a written quote before any work begins.

Is plain F6 the same as an F6 with a letter and digit after it?

No. A longer code names a more specific circuit, so it gets its own first checks. Plain F6 stays with the control or relay board for your style of microwave.

Will F6 clear on its own?

A reset may clear the display for a time. If the board or its wiring still has a problem, F6 returns, and a repeat is the cue to test instead of resetting again.

Need help with F6?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair