(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave F1E1: Two Meanings, Built-In and Over-the-Range

F1E1 means different things on two Whirlpool microwave types. On built-ins it names the appliance manager control, and on over-the-range models it names the relay control board.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F1E1 mean?

The code F1E1 turns up on two kinds of Whirlpool microwave, and it reads differently on each. A built-in microwave or drawer such as the WMC50522AS uses it for the appliance manager control of the oven, or its wiring. An over-the-range model such as the WMH31017HS, WMH32519HZ or WMH53521HZ uses it to say the oven could not execute the function, with the relay control board or its wiring involved. In both cases, expect the oven to halt or decline to begin.

F1E1 at a glance

Code
F1E1
Appliance
Whirlpool microwave
Applies to
Whirlpool microwaves: built-in WMC50522AS, over-the-range WMH31017HS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Built-in: the appliance manager control of the oven

What you may notice with F1E1

  • F1E1 appears on the display of the microwave.
  • The oven may stop or refuse to begin a cycle.
  • The code is identical on built-in and over-the-range models.

How the microwave detects F1E1

A microwave can carry more than one board, and which one a code names depends on how the oven is built. A built-in microwave uses an oven appliance manager control to run its functions. An over-the-range microwave relies instead on a relay control board that switches the parts carrying out a cooking function.

F1E1 is printed the same on both, which is why the type matters. On a built-in it points to the manager control or its wiring. On an over-the-range it says the oven could not execute the function, with the relay control board or its wiring involved. Either way the oven may stop or refuse to begin. Neither board can be judged from the display, so the circuit for your type is tested under load.

Likely causes of F1E1

  • Built-in: the appliance manager control of the oven
  • Over-the-range: the relay control board
  • Loose or damaged wiring and connectors, whichever type you own

Can you keep using the microwave with F1E1?

After a reset that clears F1E1, the microwave can return to normal use as long as you stay alert. Should the code return, whichever type you own, stop using it and switch off the breaker. A manager or relay board that fails again after a reset should be tested before the oven is trusted to heat.

What you can safely check

  1. Stop any cooking, then shut the oven's breaker off for about a minute.
  2. Switch the breaker on again.
  3. Observe the microwave for a minute to see that F1E1 stays away.
  4. Run a brief test.
  5. Should it return, leave the oven off and call us.

What our technician does for F1E1

  • Confirm which type of microwave it is, since the board tested differs
  • Test the relay or manager board under load
  • Check the wiring and connectors for that type

How to keep F1E1 from coming back

  • Keep the vents and the area around the microwave clear so heat does not build up near the boards.
  • Avoid pulling on the unit or its cord, since a loosened connector can trigger the code.

Technical reference

Code
F1E1
Appliance
Whirlpool microwave
Control family
Whirlpool microwaves: built-in WMC50522AS, over-the-range WMH31017HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F1E1

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F1E1 questions

Why does F1E1 carry two meanings?

Built-in and over-the-range microwaves print the same characters for different boards. A built-in uses them for the appliance manager control, while an over-the-range uses them for the relay control board.

Which type of microwave do I own?

Look at where it is installed: a built-in is set into cabinetry or slides out as a drawer, and an over-the-range hangs above the cooktop. The model number on the unit settles it.

Will a reset fix F1E1?

It may clear a passing glitch. If F1E1 comes back, the board or its wiring needs testing, and nothing is replaced without that.

What does F1E1 mean on an over-the-range microwave?

On those models it says the oven could not execute the function, with the relay control board or its wiring involved. That is different from the appliance manager control that a built-in microwave names for the same characters.

Does the code tell me which board has failed?

Not by itself. It names an area for the type you have, and the board is judged only after the circuit has been tested under load, so nothing is replaced on assumption.

Need help with F1E1?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair