(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave F2: Keypad or Temperature Sensor, by Model Type

A keypad report on over-the-range models, and the oven temperature sensor circuit on built-ins and drawers: that is what F2 can mean on a Whirlpool microwave, depending on the type.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F2 mean?

On Whirlpool microwaves F2 has two meanings. An over-the-range model such as the WMH31017HS, WMH32519HZ or WMH53521HZ shows it when the keypad, also called the user interface, has reported a problem to the control board, which implicates the keypad or its wiring. A built-in microwave or drawer such as the WMC50522AS shows it for the temperature sensor of the oven, the control, or the wiring. With F2 on the display, the oven may not respond or heat.

F2 at a glance

Code
F2
Appliance
Whirlpool microwave
Applies to
Whirlpool microwaves: over-the-range WMH31017HS, built-in WMC50522AS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Over-the-range: the keypad, also called the user interface, and its wiring

What you may notice with F2

  • F2 appears on the display of the microwave.
  • The oven may not respond to the keypad.
  • The oven may fail to heat.

How the microwave detects F2

The same code can mean different things when the ovens inside are built differently. On an over-the-range Whirlpool microwave, F2 comes from the keypad circuit: the keypad, also called the user interface, reports a problem to the control board. On a built-in microwave or drawer, F2 comes from the temperature side instead, where the oven's temperature sensor, the control or the wiring may be at issue.

Because a keypad test and a sensor test involve different parts, the first step is to establish which type of microwave you have. Then the matching circuit is tested. A reset can clear a glitch, but a code that returns means a lasting problem. While it shows, the oven may not respond to presses or may not heat.

Likely causes of F2

  • Over-the-range: the keypad, also called the user interface, and its wiring
  • Built-in: the oven's temperature sensor
  • The control board and wiring on either type

Can you keep using the microwave with F2?

When a reset clears F2 and the keypad and heating both behave, you can use the microwave and stay alert for a repeat. If F2 returns, stop using the oven and switch off its breaker. A keypad that fails may not let you stop a cycle, and a sensor circuit that fails may leave heating unmonitored, so wait for testing.

What you can safely check

  1. Stop any cooking, switch the microwave's breaker off, and leave it off for a minute.
  2. Switch the breaker on.
  3. Stay by the microwave for a minute and see whether F2 shows again.
  4. Try the keypad, then run a brief test.
  5. A returning F2 means the oven should stay off; call us.

What our technician does for F2

  • Identify which type of microwave it is, because the keypad and the sensor are tested differently
  • Test the circuit that matches that type
  • Explain the finding and quote the price in writing

How to keep F2 from coming back

  • Wipe the keypad with a lightly dampened cloth and keep sprays away from the panel edges.
  • Keep the vents and space around the microwave clear so heat does not build up near the sensor and control.

Technical reference

Code
F2
Appliance
Whirlpool microwave
Control family
Whirlpool microwaves: over-the-range WMH31017HS, built-in WMC50522AS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F2

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F2 questions

Why does one code carry two meanings?

The two microwave types are built differently. An over-the-range model uses F2 for the keypad, and a built-in uses it for the oven temperature sensor circuit, so the type tells you which circuit to test.

Is plain F2 the same as F2 E1?

No. F2 E1 is its own built-in code, naming the keypad and the control together, while a plain F2 on a built-in refers to the temperature sensor.

What does it mean if F2 comes back after a reset?

It points to a lasting circuit problem rather than a one-time glitch. The circuit that matches your microwave type then needs testing.

How do I know which meaning of F2 applies to me?

It depends on the microwave type. An over-the-range model mounts above the cooktop, and a built-in sits in cabinetry or a drawer. Your model number settles it, and the matching circuit is then tested.

Does F2 mean I need a new microwave?

Not by itself. The cause may be a keypad, a sensor, a connection or a control, and the finding comes before any decision about repair or replacement on an older unit.

Need help with F2?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair