Whirlpool Built-In Microwave Code 1c31: Oven Control or Wiring
Code 1c31 is a circuit message tied to the oven control and its wiring, seen on Whirlpool built-ins and microwave drawers. No single failed part is named.
What does Whirlpool microwave code 1c31 mean?
Code 1c31 belongs to the oven control circuit of Whirlpool built-ins and microwave drawers, model WMC50522AS among them. The control is the electronic board running the cooking functions, and wiring ties it to the other parts. The code does not point to a failed part. While it is displayed, the oven may refuse to start or stop heating until the control behaves normally again.
1c31 at a glance
- Code
- 1c31
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwave oven control circuit
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Oven control board holding an error it cannot clear on its own
What you may notice with 1c31
- 1c31 shows on the microwave display
- The oven may stop heating partway through
- A new cooking program may refuse to start
How the microwave detects 1c31
Inside a built-in microwave, one electronic board decides when to start, how long to run and when to stop. That board is the oven control, and it depends on wiring and connectors to talk to the parts it manages. Code 1c31 is the control's way of announcing that something about its own circuit or its connections is not right.
Because the code names a circuit rather than a part, the control board, a connector and a wire all remain possible. A glitch in the home's power can also upset the control for a moment. Restarting the oven at the breaker answers that last question: if the control comes back clean, the glitch is gone, but if 1c31 returns, the circuit needs measuring.
Likely causes of 1c31
- Oven control board holding an error it cannot clear on its own
- Wiring or connectors that carry power to the control
- A short electrical glitch that goes away with a power cycle
Can you keep using the microwave with 1c31?
Treat the microwave as out of service while 1c31 is showing, since it may not heat or start when you ask. After a reset that clears the code, short, watched use is reasonable. If the code returns, stop using the oven and leave the breaker off. Nothing about the control should be opened or tested at home.
What you can safely check
- Turn off the breaker that supplies the microwave and wait a full minute.
- Turn the breaker on again.
- Wait a minute at the display to see if 1c31 comes back.
- If it stays away, try a short cooking test to see that the oven works.
- If the code returns, leave the microwave off and call us.
What our technician does for 1c31
- Test the oven control board directly
- Check the wiring and connectors that supply it
- Decide between control and wiring by testing, then quote the price in writing
How to keep 1c31 from coming back
- Plug nothing extra into the microwave's circuit during storms, and consider the surge protection your home already has.
- Keep the vents and the area around a built-in unit clear so the electronics are not left in trapped heat.
Technical reference
- Code
- 1c31
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwave oven control circuit
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
1c31 questions
What exactly is the oven control on a built-in microwave?
The board behind the front that manages cooking is the oven control. When 1c31 shows, either the board or its wiring is under suspicion, and only a breaker reset is worth trying before testing.
Can turning the breaker off for a minute harm the microwave?
No, it does no harm. The maker gives a one-minute power cycle for this code: switch the breaker off, then on, and watch the oven. If the code returns, stop resetting.
Can a built-in microwave around ten years old be repaired?
Older built-in units and microwave drawers can be repaired as well. We also say plainly when a repair costs more than it is worth compared with replacing the unit.
Is 1c31 the same as its neighboring codes?
Both belong to the same family and name the oven control and its wiring. Only the last characters differ, so read your display carefully when you describe the problem.
Could a power surge cause 1c31?
A disturbance in the supply can upset the control for a moment, and a restart may clear it. If the code keeps returning, the control or its wiring needs testing rather than another reset.
Need help with 1c31?
We trace the cause in your home first and write the price down before any part is swapped.