(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Built-In Microwave 4d32: Control Reset Needed

A Whirlpool microwave showing 4d32 has a problem with the oven control or its wiring, though no failed part is named. One minute without power is the only step owners should try.

Needs attention soonChecked November 2026

What does Whirlpool microwave code 4d32 mean?

The WMC50522AS and other Whirlpool built-in microwaves or drawers can show 4d32 for a problem with the oven control or its wiring. No failed part is named. In practice you see a code, and the oven may not continue its normal functions. The code coming back after a one-minute power reset is what tells a technician the control needs closer attention.

4d32 at a glance

Code
4d32
Appliance
Whirlpool microwave
Applies to
Whirlpool built-in microwave and drawer oven control
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Control that repeatedly flags a condition it cannot clear

What you may notice with 4d32

  • 4d32 appears on the oven display
  • The oven may not continue its normal functions
  • The code returns after a reset if the condition remains

How the microwave detects 4d32

The oven control decides when a microwave heats, how long it runs and when it stops. To do that it relies on wiring that carries its commands and the answers that come back. A condition in that loop is what 4d32 reports.

The code does not say which part is responsible, and nothing on the front panel narrows it down. A short power interruption can leave the control confused for a moment, so a one-minute reset is the one owner step. If 4d32 shows up again afterward, the condition is real, and the control board and its connections are tested.

Likely causes of 4d32

  • Control that repeatedly flags a condition it cannot clear
  • Wiring that feeds the control
  • A short-lived glitch removed by a restart

Can you keep using the microwave with 4d32?

While 4d32 is on the display, assume the oven may not continue with its usual functions and avoid using it. If a reset clears the code and a brief test works, you can resume ordinary use. A code that returns means the oven should stay off and the cabinet should stay closed until the control has been tested.

What you can safely check

  1. Use the breaker to remove power from the microwave and wait sixty seconds.
  2. Switch the breaker back on.
  3. Watch the display for a minute for any sign of 4d32.
  4. Run a short test to confirm the oven works.
  5. If 4d32 shows again, leave the oven off and call us.

What our technician does for 4d32

  • Check the control board and its connections
  • Decide between a control problem and a wiring problem before giving a quote
  • Give the written price first

How to keep 4d32 from coming back

  • Give the microwave stable power and avoid sharing its circuit with heavy appliances.
  • Keep cleaning spray off the control side of the unit, since moisture can reach the electronics.

Technical reference

Code
4d32
Appliance
Whirlpool microwave
Control family
Whirlpool built-in microwave and drawer oven control
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

4d32 questions

How worried should I be about 4d32?

The code is a control-circuit message, so see it as something to check and not to ignore. A single reset that clears it for good is fine. If it returns, the control should be tested.

Is a second or third reset worth trying when 4d32 returns?

No. A single reset is the maker's step. Extra tries postpone the repair and bury the message the control is sending, so keep the oven off and have the control tested with power disconnected.

Do older Whirlpool built-ins get repaired?

Yes, after the control has been tested. When fixing one would cost more than it is worth, we say so plainly with a written price.

What is the difference between 4d32 and a keypad code?

A keypad code points to the touch panel circuit, while 4d32 points to the oven control and its wiring. Read the exact characters on your display so we know which one you have.

Will the oven work normally if 4d32 clears?

It should, and a short test run confirms it. If the code returns later, the problem is still in the circuit, and testing is the right next step.

Need help with 4d32?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair