Whirlpool Microwave Code 1c6c: Control Problem on a Built-In Unit
Whirlpool built-ins and drawers show 1c6c when the main control, or the wiring serving it, has reported a problem. It narrows the search to a circuit, not to one part.
What does Whirlpool microwave code 1c6c mean?
For Whirlpool built-ins and microwave drawers like the WMC50522AS, the code 1c6c means the main control, or the wiring serving it, has raised a problem. Like its neighbors in the family, it describes a circuit, so it tells a technician where to begin without naming the part. Heating may be interrupted or refused until the condition clears.
1c6c at a glance
- Code
- 1c6c
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool microwave drawers and built-ins, main control
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Main control board that flags a problem inside itself
What you may notice with 1c6c
- 1c6c shows on the oven display
- The oven may stop in the middle of a cycle
- Start commands may be ignored until the code clears
How the microwave detects 1c6c
At the center of a built-in microwave sits the main control board, which tells the oven when to heat, how long to run and when to stop. It is joined to the other parts by wiring and connectors, and it keeps checking that each connection answers properly. A wrong answer produces 1c6c on the display and holds back the cooking function.
The code covers the control and its connections together, so it cannot choose between a failing board and a damaged lead. A momentary disturbance in the supply could also have confused the board. Cutting power at the breaker for a minute lets it restart with a clean slate. That restart is the dividing line: a lasting 1c6c calls for measuring the circuit.
Likely causes of 1c6c
- Main control board that flags a problem inside itself
- Wiring that has come loose or been damaged near the control
- Electrical glitch erased by a brief power-down
Can you keep using the microwave with 1c6c?
Use the oven only after a reset has cleared 1c6c and a short test cycle runs normally. If the code stays or returns, do not use the microwave for food, because it may not heat as expected. Switch it off at the breaker and keep out of the housing around the control.
What you can safely check
- Locate the microwave's breaker and switch it off for sixty seconds.
- Switch it on again.
- Look over the display for the next minute for any sign of 1c6c.
- If it stays away, run a short heating test to see that the oven behaves.
- If the code returns, keep the breaker on and call us.
What our technician does for 1c6c
- Test the main control and its supply
- Inspect the wiring and its connectors at the control
- Quote the repair in writing, and replace only the part that fails the test
How to keep 1c6c from coming back
- Avoid slamming the door or banging the trim, which can shake connectors loose inside a built-in unit.
- During Florida storms, switch the microwave off at the breaker if lightning is close, since surges can upset electronics.
Technical reference
- Code
- 1c6c
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool microwave drawers and built-ins, main control
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
1c6c questions
What does 1c6c tell me about my built-in microwave?
It tells you the main control or its wiring has reported a problem. The code names no part, so the first step is a one-minute breaker reset and the next is testing.
The oven worked again after a reset. Am I finished?
Probably for now. A passing glitch can explain it. If 1c6c comes back during normal use, the circuit still has a problem, and the control should be tested.
Can 1c6c be handled by me with a wiring check?
No. The control and its wires sit inside the cabinet, near live parts. The breaker reset is the only owner step, and everything else is left to a technician.
Could a storm have caused 1c6c?
A surge or brief power disturbance can upset a control board and trigger a code that a restart clears. If 1c6c keeps returning after the reset, the cause is more likely in the control or its wiring.
Is it worth repairing an older built-in microwave with this code?
It can be, depending on the unit and the cost. We test first, explain what we found, and tell you plainly when a repair makes less sense than replacing the microwave.
Need help with 1c6c?
We trace the cause in your home first and write the price down before any part is swapped.