(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Built-In Microwave 1c4c: Main Control and Connections

A Whirlpool microwave that displays 1c4c is flagging trouble with its main control or with the wiring that serves it. The code names a circuit, not one bad part.

Needs attention soonChecked November 2026

What does Whirlpool microwave code 1c4c mean?

An oven showing 1c4c, whether a Whirlpool built-in or a microwave drawer such as WMC50522AS, has noticed trouble in its main control or in the wiring leading to it. Think of the code as a pointer to a circuit rather than a verdict on one part. Until the condition clears, a cooking cycle may be interrupted or refused.

1c4c at a glance

Code
1c4c
Appliance
Whirlpool microwave
Applies to
Whirlpool built-in microwaves with a main control board
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Main control board noticing an internal condition

What you may notice with 1c4c

  • 1c4c appears on the oven display
  • Cooking stops or will not begin
  • The oven acts normally again only after the code clears

How the microwave detects 1c4c

Every function of a built-in microwave passes through its main control, a board that starts the heating, runs the timer and watches the door. The board is joined to the rest of the oven by wiring, and the control expects the whole circuit to answer correctly each time it checks. When it does not, the oven shows 1c4c.

The code speaks about a circuit, which is why it cannot say whether a board, a connector or a wire is to blame. The control may also have been upset by a short power disturbance. A one-minute breaker reset gives it a clean start. If 1c4c stays away, the disturbance explains it; if the code reappears, the circuit has a real condition to measure.

Likely causes of 1c4c

  • Main control board noticing an internal condition
  • Loose or damaged wiring leading to the control
  • A power glitch removed by a short breaker reset

Can you keep using the microwave with 1c4c?

While 1c4c is displayed, assume the microwave may not heat or may stop mid-cycle, and do not rely on it for food. A reset that clears the code allows normal use with a watchful eye. If it returns, switch the oven off at the breaker, since further tries tell you nothing new, and keep hands out of the control area.

What you can safely check

  1. Switch the microwave's breaker off and leave it for sixty seconds.
  2. Switch it on.
  3. Stay near the display for a minute and see whether 1c4c is back.
  4. If it is not, run a brief heating cycle and check that the oven behaves normally.
  5. If the code is back, call us rather than resetting again.

What our technician does for 1c4c

  • Measure the main control and its wiring before changing anything
  • Work out whether the wiring or the control is responsible
  • Replace only the part the measurements point to, with the price written first

How to keep 1c4c from coming back

  • Give the microwave its own steady circuit where you can, instead of sharing it with heavy appliances.
  • Keep the door seal and surrounding trim clean and tidy so nothing presses against the control area.

Technical reference

Code
1c4c
Appliance
Whirlpool microwave
Control family
Whirlpool built-in microwaves with a main control board
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c4c questions

Which step should come first when 1c4c shows on a microwave drawer?

Start with the breaker: off for one minute, then on, then a minute of watching the display. If 1c4c is gone, nothing more is needed. If it comes back, the control needs testing.

Is 1c4c a sign I need a new microwave?

Not on its own. Only testing shows the cause, because the code points to a circuit in the control. Replacement is worth discussing only when a repair would cost more than the unit justifies.

Should I use the oven at all with 1c4c on the display?

Probably not. It may not heat or run normally with the code up, so leave it off after one failed reset and have the control checked.

How is 1c4c different from the other 1c codes?

The family shares one idea, a problem in a control circuit, but each code ends in different characters. Tell us exactly what your display shows so we know which circuit the oven means.

Will 1c4c go away if I leave the oven alone?

A passing disturbance may clear after a restart, but a real condition in the control will not fix itself. If the code is still there after one breaker reset, it needs to be tested.

Need help with 1c4c?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair