Whirlpool Microwave Drawer Code 1c8c: Control Wiring Message
1c8c on a Whirlpool built-in microwave or microwave drawer flags the oven control or the wiring around it. The code points to a circuit and leaves the exact part open until testing.
What does Whirlpool microwave code 1c8c mean?
Whirlpool microwave drawers and built-in microwaves, among them the WMC50522AS, can display 1c8c to flag a problem in the oven control or the wiring attached to it. The message marks a circuit, so it leaves the exact part open. The code appears on the display, and the oven may not perform its usual cooking functions until the control recovers.
1c8c at a glance
- Code
- 1c8c
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool microwave drawer and built-in oven controls
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Control board raising an error condition
What you may notice with 1c8c
- 1c8c shows up on the display
- The oven may not start its usual cooking functions
- The code can disappear after power is cycled
How the microwave detects 1c8c
When you press Start, the oven control wakes the heating parts, runs the timer and watches for anything that does not add up. It listens to its own circuits through wiring and connectors, and it stops the program when one of them gives an answer it cannot accept. The code that results here is 1c8c.
The control reports the circuit, not the cause. A damaged harness, a poorly seated connector and the board itself would all show the same message, and so might a brief power interruption in the house. A breaker reset removes the last case from the list. When 1c8c survives it, the next step is putting a meter on the control and its harness.
Likely causes of 1c8c
- Control board raising an error condition
- A damaged harness or poorly seated connector near the control
- A single electrical blip that a restart wipes away
Can you keep using the microwave with 1c8c?
Keep the microwave off while 1c8c is displayed, because it may not cook as it should. If a reset clears the code and a short test works, ordinary use can resume with a careful eye on the display. When the code comes back, leave it switched off at the breaker and do not reach behind the panel.
What you can safely check
- Switch the microwave's breaker off and leave it for a minute.
- Switch it on.
- Keep watching the display for a minute and look for 1c8c.
- Run a brief test cycle if it does not return, to see that the oven works.
- If the code comes back after the reset, leave the oven off and call us.
What our technician does for 1c8c
- Test the control board and the harness together
- Name the responsible part only after the test, then quote in writing
- Check connectors at the same visit
How to keep 1c8c from coming back
- Switch the microwave off at the breaker before moving it or cleaning behind a built-in unit.
- Keep air vents free of dust so the electronics are not left running hot.
Technical reference
- Code
- 1c8c
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool microwave drawer and built-in oven controls
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
1c8c questions
Why does my microwave show 1c8c?
The oven control or the wiring tied to it has reported a problem. The code does not name a part, so a breaker reset comes first and testing comes next.
After the reset the code vanished. Do I need to do more?
If it stays away during normal use, no. A passing glitch may explain it. If it returns, the control should be tested instead of reset again.
Can a repair on a built-in drawer be worthwhile?
Often it can be. We compare the repair cost with the value of the unit and say plainly if replacement would be the better choice.
Does 1c8c mean the whole drawer is dead?
No. The code points to the control circuit, and a restart or a repair can bring the oven back. The aim of testing is to find which part, if any, actually needs replacing.
Is 1c8c covered by the maker warranty?
Check your warranty terms, because cover depends on the age of the microwave and your agreement. An independent technician can still diagnose the code, and we explain the findings in writing.
Need help with 1c8c?
We trace the cause in your home first and write the price down before any part is swapped.