Whirlpool Microwave Drawer F6 E6: Manager Control Board Check
Whirlpool built-in microwaves and drawers use F6 E6 for the oven manager's control board or the harness serving it, and not for the manager as a whole.
What does Whirlpool microwave code F6 E6 mean?
F6 E6 is displayed when the oven manager's control board, or the harness that serves it, reports a problem on built-in Whirlpool microwaves and drawers such as WMC50522AS. It belongs to the F6 family and names the control board specifically, where its neighbor names the manager as a whole. The code stays on the screen and the usual functions do not run. Like its siblings it identifies a circuit for testing, and it cannot say which part has given out.
F6 E6 at a glance
- Code
- F6 E6
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwave manager control board, WMC50522AS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Control board of the oven appliance manager
What you may notice with F6 E6
- F6 E6 stays on the screen and the unit will not run
- The usual functions of the oven do not run
- The code may return after power is restored
How the microwave detects F6 E6
The oven manager's control board receives signals through wiring, among them the link to the display or keypad, and it directs how the oven section behaves. The wiring has to deliver those signals cleanly.
F6 E6 appears when that board, or the harness serving it, reports a problem. The cause could be the board, a wire that no longer carries its signal or the link to the display or keypad. The code cannot separate them, so the circuit is tested where it sits. Power removed at the breaker and restored restarts the board. If the code stays away, the glitch was passing. If it comes back, the reset did not remove the cause, and the manager control and its wiring are tested in place.
Likely causes of F6 E6
- Control board of the oven appliance manager
- Wiring that carries signals to that control board
- Link between the display or keypad and the control
Can you keep using the microwave with F6 E6?
Not while F6 E6 stays on the screen, because the usual functions do not run and the control board is reporting a problem. Do not press button combinations. One breaker reset is a fair try. If the display stays calm and the microwave works, you can use it and watch for a repeat. If F6 E6 returns, leave it switched off until the manager control board has been tested.
What you can safely check
- Leave the microwave idle and flip its breaker off for a minute.
- Flip it back on.
- Observe the unit for a minute to see whether F6 E6 reappears.
- With the display calm, cook as you normally would.
- If the code returns, leave the microwave off and call us.
What our technician does for F6 E6
- Test the manager control board in place
- Inspect the wiring that carries signals to it
- Check the display or keypad link
How to keep F6 E6 from coming back
- Avoid pressing keys in sequence in the hope of clearing the code; removing power at the breaker is the safe step.
- Report a code that appears briefly and goes away, since an early report makes the circuit easier to test.
Technical reference
- Code
- F6 E6
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwave manager control board, WMC50522AS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F6 E6 questions
Is F6 E6 aimed at the board or at the whole manager?
Whirlpool phrases it as the manager control, meaning the control board with its wiring. Think of it as a pointer to that circuit; nothing is blamed until a test.
Is there a panel button that clears F6 E6?
No, and pressing button combinations is not advised. Taking power off at the breaker for a minute is the one safe move. Should the code come back, the control needs testing.
How long does diagnosing F6 E6 take?
That depends on the unit. The manager circuit is tested, and the cause and the written price are explained before any repair begins.
Does F6 E6 mean the control board has to be replaced?
No. The code identifies a circuit and not a verified bad part. The board and its wiring are tested in place, and a replacement follows only if the board proves to be the cause.
Is F6 E6 a different problem from the neighboring manager code?
Both belong to the manager family and are tested the same way, but each has its own number and wording. We confirm on the oven which circuit the control is reporting.
Need help with F6 E6?
We trace the cause in your home first and write the price down before any part is swapped.