Whirlpool OTR Microwave Showing PF: The Clock Lost Power
A blinking colon or PF shown by a Whirlpool over-the-range microwave means power was interrupted or the clock was switched off, so the clock simply needs setting again.
What does Whirlpool microwave code PF mean?
After a power failure, or when the clock time is turned off, Whirlpool over-the-range microwaves such as the WMH32519HZ and WMH53521HZ show PF or a flashing colon. The colon blinks the moment power first arrives. The oven is not damaged. It expects you to clear the indicator and enter the time. Give it a value that is not valid and it sounds tones and asks once more.
PF at a glance
- Code
- PF
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool OTR microwave clock display after power loss
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- A power outage or a brief interruption
What you may notice with PF
- A flashing colon or PF where the time normally shows
- The oven tones when a value you enter is invalid
- Power at home was cut or flickered a little earlier
How the microwave detects PF
A microwave keeps time only while power reaches it. When power is cut, even for a moment, the clock stops counting. Once power returns, the control has no idea what time it is, so it shows a blinking colon or the letters PF to say the clock needs setting again.
The same display appears if the clock time has been switched off on purpose. The heating, the fan and the light do not depend on the clock, so none of them is affected. The control waits for you to touch Cancel, which clears the indicator, and then to enter the time. If you type something that makes no sense, such as a minute that does not exist, it answers with tones and asks again instead of accepting it.
Why PF appears
- A power outage or a brief interruption
- The clock time switched off
- The breaker turned off and then back on
Can you keep using the microwave with PF?
Yes, the microwave can be used while PF shows, though most people set the clock first. The indicator is not a safety matter, since it only reports that power was interrupted. If PF returns again and again with steady power at home, mention that pattern so the supply and control can be checked.
What you can safely check
- The microwave needs no switching off; it only lost its clock.
- Touch Cancel, or Cancel/Off on some models, to stop the blinking.
- Set the clock to the correct time.
- If a value gets refused, you will hear the invalid-entry tones; enter it again.
- If PF keeps returning although the power at home has been steady, contact us.
What our technician does for PF
- Check the supply to the microwave if PF returns without an interruption
- Check whether the control keeps losing its clock
How to keep PF from coming back
- After a storm, set the clock once and let it run, rather than cutting power at the breaker again and again.
- A surge protector at the panel can help fixed appliances ride through the flickers common during Florida thunderstorms.
Technical reference
- Code
- PF
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool OTR microwave clock display after power loss
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show PF
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
PF questions
What is PF trying to tell me?
Power was lost at some moment, or the clock display was switched off. The oven keeps PF or a flashing colon on screen, and it will stay there until Cancel is pressed and the time is entered again.
Is a technician needed for PF?
Normally not. Press Cancel, enter the correct time and carry on. A microwave that keeps falling back to PF while the power at home is steady is the case worth a visit.
Why did PF appear after a storm?
Even a short interruption wipes the clock display, and that is normal. Brief flickers can do it too, so you may see PF even when the lights barely dimmed.
Did the outage damage my microwave?
No. PF only reports that power was interrupted or the clock was turned off. The heating system is not involved, so the microwave should work normally as soon as the clock is set.
Will PF go away without any action?
No, the blinking remains until you press Cancel and enter the time. It does not clear by itself, and it comes back after the next interruption, so setting the clock is the lasting fix.
Something else going on with your microwave?
We trace the cause in your home first and write the price down before any part is swapped.
