Whirlpool Over-the-range Microwave F9Q: A Code With Only a Reset
F9Q on a Whirlpool over-the-range microwave comes with guidance that names no part and gives only a power reset, so a repeat means the control needs testing.
What does Whirlpool microwave code F9Q mean?
Whirlpool's WMH31017HS, WMH32519HZ and WMH53521HZ over-the-range microwaves are among those that can show F9Q. Unlike most codes, its guidance names no part or circuit and offers a single remedy, a power reset. The microwave will not carry on as usual while F9Q is displayed. With nothing narrower stated, we read F9Q as a general control report that deserves testing if it repeats.
F9Q at a glance
- Code
- F9Q
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool OTR microwave, power reset code
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A control state that a power reset clears
What you may notice with F9Q
- F9Q appears on the unit's display
- The microwave does not carry on as it usually does
- A breaker reset clears the message, at least for a while
How the microwave detects F9Q
Most microwave codes point toward a specific sensor or board. F9Q is different, because the guidance for it names no part and no circuit. The only instruction given is a power reset, which suggests the control found itself in a state it could not continue from and is asking to be restarted.
A control can land in that state for ordinary reasons, such as a brief power interruption in the middle of a cycle. Cutting power at the breaker and restoring it then gives the control a clean start, and the code disappears. If F9Q returns after the reset, the reason was not momentary. The control board may be failing, or the plugs and wires leading to it may be causing intermittent trouble. With nothing more specific in the code, testing starts at the board and moves outward.
Likely causes of F9Q
- A control state that a power reset clears
- A control board that is starting to fail
- Plugs and wires leading to the control
Can you keep using the microwave with F9Q?
If a single reset clears F9Q and the microwave behaves normally, keep using it and pay attention for a repeat. A repeat is the cue to stop and leave it off at the breaker. The code itself is not described as a hazard, but a control that keeps hitting an unexplained state can also fail at an inconvenient moment, so do not ignore a pattern.
What you can safely check
- Begin at the panel: shut the breaker that feeds this microwave, and leave the unit closed.
- Count a full minute before switching power back on.
- Stand by the unit for sixty seconds and see whether F9Q returns.
- If the display stays clear, go back to cooking.
- Should F9Q return after the reset, put the microwave aside and ring us.
What our technician does for F9Q
- Begin at the control board and work outward
- Test the plugs and wires leading to the control
- Explain the cause before any repair
How to keep F9Q from coming back
- Reset the microwave breaker once after any outage or flicker, and check the display before you cook.
- Avoid cutting power partway through a cycle, since an interrupted cycle can leave the control in an odd state.
Technical reference
- Code
- F9Q
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool OTR microwave, power reset code
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show F9Q
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
F9Q questions
What exactly does F9Q tell me?
Beyond a general control report, not much. The guidance offers only a power reset. Should it come back, we test the control and what feeds it to find the reason.
Does F9Q mean something serious?
Not on its own. If one reset removes the message and the oven works, carry on cooking but stay alert. Only a repeat calls for testing.
Is there a charge to look at it?
Nothing starts until you have a written price in hand, so the choice is made with the number in front of you, after you have heard the cause.
Will F9Q clear by itself?
In many cases a power reset is all it takes, and afterward the code stays away. Only if F9Q keeps coming back do we need to look at the control board and what feeds it.
How is F9Q different from F9?
F9 lists two boards and their harness, while F9Q lists nothing and offers only a power reset. We test the control circuit if either one keeps coming back.
Need help with F9Q?
We trace the cause in your home first and write the price down before any part is swapped.
