(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave F3 E4: Is the Meat Probe Seated?

F3 E4 is a meat probe code on Whirlpool built-in microwaves and drawers, and the first thing the brand asks is that the probe is fully inserted into its socket.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F3 E4 mean?

Whirlpool classes F3 E4 as a meat probe code on its built-in microwaves and microwave drawers, WMC50522AS among them. The brand's advice is to confirm the probe is firmly inserted in its receptacle, and the receptacle's position may vary by model. When a seated probe still leaves the code on the display, the power reset is the next step. Seating is the easiest cause to rule out, so it comes first.

F3 E4 at a glance

Code
F3 E4
Appliance
Whirlpool microwave
Applies to
Whirlpool microwave with meat probe receptacle, WMC50522AS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Probe pushed in only part way

What you may notice with F3 E4

  • F3 E4 appears on the display
  • The probe may be sitting only part way into its receptacle
  • The code may return even after the probe is pushed in

How the microwave detects F3 E4

When you cook with the meat probe, it has to make a solid electrical connection in the receptacle, because that connection is how the control learns the food temperature. A probe that is only partly pushed in may not reach the contacts properly.

The control watches this probe connection and shows F3 E4 when it does not read as expected. The most ordinary reason is a probe that is not fully seated, which is why Whirlpool's guidance starts there. If seating is fine, the next suspects are the probe itself, the contacts in the receptacle and the wiring behind it. The power reset restarts the control after you have reseated the probe. A good connection clears the code, and a persistent problem makes F3 E4 return.

Likely causes of F3 E4

  • Probe pushed in only part way
  • Meat probe with a damaged plug or lead
  • Worn receptacle contacts or the wiring behind them

Can you keep using the microwave with F3 E4?

If reseating the probe and the breaker reset clear F3 E4, you can use the oven again, and a short cycle without the probe is a gentle first test. If the code returns, leave the probe out. If F3 E4 keeps appearing with no probe in use, stop using the oven until the circuit has been checked.

What you can safely check

  1. Make sure the oven is cool, then take the meat probe out of its receptacle and press it back in all the way.
  2. Turn the breaker off for a minute.
  3. Turn the breaker on again.
  4. Check whether F3 E4 reappears within the next minute.
  5. If it does, give us a call; the probe, the receptacle or the wiring needs testing.

What our technician does for F3 E4

  • Check the receptacle contacts
  • Read the probe circuit
  • Test the probe and the wiring one by one before replacing anything

How to keep F3 E4 from coming back

  • Always push the probe all the way into its receptacle before you start a cooking cycle.
  • Keep the receptacle clean and dry, and wipe it only when the oven is cool and switched off.

Technical reference

Code
F3 E4
Appliance
Whirlpool microwave
Control family
Whirlpool microwave with meat probe receptacle, WMC50522AS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F3 E4 questions

What should I do first about F3 E4?

Press the meat probe fully into its receptacle. Whirlpool asks owners to confirm it is securely inserted, and the position of the receptacle differs between models.

The probe is seated firmly and F3 E4 stays. Now what?

Run the reset, breaker off for one minute and on again. If the code is still there afterward, the problem lies with the probe, the receptacle or the wiring, and the next step is a test, which we perform at your home.

Can I cook without the probe in the meantime?

It may be possible once the display clears. If F3 E4 appears again while no probe is plugged in, stop using the oven and have it checked.

Can a probe that looks fully inserted still cause F3 E4?

Yes. A probe can look seated and still make weak contact, and worn receptacle contacts or wiring can cause the same code. That is why we test the circuit when F3 E4 survives a firm reseat and a reset.

Is F3 E4 the same as F3 E3?

They both involve the meat probe circuit. F3 E4 includes Whirlpool's step to verify the probe is firmly seated, while F3 E3 lists the probe, the receptacle and the wiring. Our checks cover all of those either way.

Need help with F3 E4?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair