Whirlpool Built-In Microwave F3 E3: Meat Probe Circuit Check
F3 E3 on a Whirlpool built-in microwave or drawer concerns the meat probe, the receptacle it plugs into, or the wiring. It may show when a probe cook did not read as expected.
What does Whirlpool microwave code F3 E3 mean?
Whirlpool built-in microwaves and microwave drawers, WMC50522AS among them, use F3 E3 for the oven meat probe, the receptacle it plugs into, or the wiring behind it. A cook using the probe may see the code because the probe circuit did not read as the control expected. The guidance is a power reset, with no failed part given. F3 E3 is therefore a probe circuit that needs checking and does not single out any one item.
F3 E3 at a glance
- Code
- F3 E3
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwave with meat probe, WMC50522AS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Meat probe or its plug
What you may notice with F3 E3
- F3 E3 on the display, possibly while cooking with the probe
- The oven stops carrying on as normal
- The code may come back only when the probe is plugged in
How the microwave detects F3 E3
A meat probe lets the oven follow the temperature of the food. The probe plugs into a receptacle in the oven, and a wiring run carries its signal to the control. The control expects a clear, believable signal whenever a probe is in use.
F3 E3 means the control found something wrong in that chain. The probe could be damaged, its plug may not be making contact, the receptacle could be worn, or the wiring behind the receptacle may have a problem. The control cannot tell which, and the display does not say. Whirlpool's reset restarts the control and lets it check the probe circuit again. A circuit that is sound stays quiet afterward. A circuit with a problem sends F3 E3 back to the display.
Likely causes of F3 E3
- Meat probe or its plug
- Receptacle the probe plugs into
- Wires running from the receptacle to the control
Can you keep using the microwave with F3 E3?
You may be able to cook without the probe once the display is clear, since the code concerns the probe circuit. Reseat the probe, do the breaker reset and try a short cycle without it. If F3 E3 comes back even with the probe out, stop using the oven. Until the circuit has been tested, do not use the probe again.
What you can safely check
- Make sure the oven is cool and idle.
- If the meat probe is in its socket, take it out and press it in again until it is fully home.
- Turn the breaker off for a minute, restore it, and read the display for F3 E3.
- With a clear display, run a brief trial cycle with the probe left out.
- If the code returns, call us.
What our technician does for F3 E3
- Test the meat probe and its plug
- Test the receptacle separately
- Check the wiring from the receptacle to the control
How to keep F3 E3 from coming back
- Push the probe plug fully into its receptacle and unplug it by the plug, not by pulling the cord.
- Wipe food splatter from the receptacle area when the oven is cool and switched off.
Technical reference
- Code
- F3 E3
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwave with meat probe, WMC50522AS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
F3 E3 questions
Is my meat probe broken when F3 E3 appears?
Not necessarily. The code spans the probe, the receptacle it plugs into and the wiring behind it, and we test each one separately so repairs cover only what is actually wrong.
Can I microwave without the probe meanwhile?
Possibly, because the code concerns the probe circuit and not the cooking functions. When the display is clear, try it; if F3 E3 keeps coming back with the probe removed, the oven needs a check.
What separates F3 E3 from F3 E4?
Both relate to the meat probe circuit. For F3 E4 Whirlpool adds a step to confirm the probe is seated firmly, while F3 E3 lists the probe, the receptacle and the wiring as areas for testing.
Would a replacement probe solve F3 E3?
Not before testing. The code covers the probe, the receptacle and the wiring, and a new probe fixes only one of those. A test shows whether the probe is the cause or whether the problem is further back.
Will F3 E3 clear by itself?
It may disappear after reseating the probe and resetting the power. If the cause is still there, the code returns the next time the circuit is read, and then the circuit needs a proper test.
Need help with F3 E3?
We trace the cause in your home first and write the price down before any part is swapped.