(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Display LOC: The Control Lock Is Switched On

LOC on a Whirlpool microwave says the Control Lock is on. The keys are switched off deliberately to prevent unintended use, so it is a feature and not a failure.

Normal status, not a failureChecked November 2026

What does Whirlpool microwave code LOC mean?

LOC reports that the Control Lock is on. Built-in microwaves and drawers such as the WMC50522AS shut down the panel, so a key press brings Locked, Lock or LOC with invalid-entry tones. Over-the-range models like the WMH31017HS may show a padlock or an L, and release needs Cancel held for three seconds or Start held for five, depending on the model. Countertop models, the WMC30516HZ for one, add a two-step door opening marked by a door icon.

LOC at a glance

Code
LOC
Appliance
Whirlpool microwave
Applies to
Whirlpool microwaves, Control Lock, built-in to countertop
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
The Control Lock was switched on

What you may notice with LOC

  • The display shows a lock marker such as LOC, an L or a padlock
  • Each key press answers with invalid-entry beeps
  • On a countertop unit, the door stays shut with the door icon lit

How the microwave detects LOC

The Control Lock is a convenience feature. Once enabled, it makes the control ignore the keypad, so a child or a cleaning cloth cannot start the microwave by accident. A key press still gets an answer, though: an invalid-entry tone, and a short word or symbol on the display. Built-in models show Locked, Lock or LOC. Over-the-range models may show an L or a padlock.

Turning the lock off takes a deliberate hold on a key, and which key depends on the model. Some want Cancel held for three seconds, others Start for five, while built-in units refer you to the owner's manual. Countertop models add one more layer, a two-step door opening that is signaled by a door icon, so even the door can be part of the locked state.

Why LOC appears

  • The Control Lock was switched on
  • A door icon lit on a countertop model that has the two-step door opening

Can you keep using the microwave with LOC?

Yes, a locked microwave is working as it should. Release the lock with the method for your model and use the microwave normally. The lock itself raises no safety concern. Only if the keys stay dead after the correct release steps does the keypad deserve a look.

What you can safely check

  1. Nothing here requires switching the power off, since the microwave works as designed.
  2. Look for a lock marker on the screen, whether that is LOC, Lock, Locked, an L or a padlock.
  3. On over-the-range and countertop models, a three-second hold on Cancel releases the lock, or a five-second hold on Start, depending on the model.
  4. If a countertop unit shows the door icon, press Stop and then Door Release.
  5. Built-in models differ, so check the manual; if keys stay dead after the right steps, contact us.

What our technician does for LOC

  • Test the keypad when the lock refuses to release
  • Check the keypad connection when presses do nothing

How to keep LOC from coming back

  • Note the release method for your model somewhere you can find it quickly.
  • Avoid leaning on or dragging a cloth across the keypad while the microwave is idle.

Technical reference

Code
LOC
Appliance
Whirlpool microwave
Control family
Whirlpool microwaves, Control Lock, built-in to countertop
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show LOC

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

LOC questions

Why is the microwave beeping at me and showing LOC?

Your keys are switched off on purpose by the Control Lock, and every press earns an invalid-entry tone. Nothing is broken. Use the release method for your model, and read the manual if your keys behave differently.

How can I turn the lock off?

That varies by model. A three-second hold on Cancel does it on some, a five-second hold on Start on others, and built-in units refer you to their own owner's manual.

The door will not open. Could that be the lock too?

It could, on a countertop model with a two-step door opening. Press Stop, then Door Release. A door icon lights up while that lock is active.

Does LOC suggest the keypad has failed?

No, LOC is a setting and the keys are off by design. A true keypad problem shows up as keys that fail to answer with the lock released, and that is when testing makes sense.

Will the lock switch off on its own?

It stays on until you release it with the right hold. Cutting power at the breaker is not described as the way to clear it, so use the proper hold instead.

Something else going on with your microwave?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair