Whirlpool Wall Oven 1c2c: Keypad Circuit Reporting a Problem
1c2c on a Whirlpool wall oven names the same keypad and wiring area as 1c1c; it is its own code, and the oven may ignore your presses while it shows.
What does Whirlpool wall oven code 1c2c mean?
Whirlpool wall ovens in the single, double and microwave-combo families, among them the WOS51EC0HS, WOD51EC0HS, WOC54EC7HS and WOS72EC7HS, can display 1c2c. The area is the same as for 1c1c: the keypad and display, and the wiring behind them. Treat it as a separate code with its own entry. While it stays on screen, the oven may ignore your presses. It points to a circuit that needs testing and not to a ruined part.
1c2c at a glance
- Code
- 1c2c
- Appliance
- Whirlpool wall oven
- Applies to
- Whirlpool wall ovens with a keypad, e.g. WOC54EC7HS and WOS72EC7HS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Keypad and display assembly
What you may notice with 1c2c
- 1c2c is displayed and the oven seems deaf to your presses.
- A setting you enter does not register.
- The message may disappear after a power restart and then return.
- The oven may otherwise look normal.
How the wall oven detects 1c2c
The keypad and display you press and read are connected to the control by a ribbon or cable. The control watches that link for steady, readable signals whenever the oven is powered. 1c2c shows when that watching turns up something it cannot accept.
The pointer is the same as for 1c1c, so the same parts are suspects: the pad itself, the ribbon or plug that joins it, or the control input listening to it. Which one it is cannot be told from the display, and the oven may ignore presses in the meantime. A check made with the interface in place shows whether the pad or the link is responsible.
Likely causes of 1c2c
- Keypad and display assembly
- Ribbon cable or plug linking the keypad
- Input on the control board that listens to the keypad
Can you keep using the wall oven with 1c2c?
If the code stays away after a restart and the oven responds normally, you can keep using it and watch it. If 1c2c comes back, have the circuit tested before relying on the oven, because a keypad that drops presses can leave you unsure whether a setting was accepted. Turn the breaker off if you notice a burning smell.
What you can safely check
- Let the cavity cool, then go to the electrical panel and flip the oven's breaker to off.
- Give it a full sixty seconds.
- Flip it back on and glance at the screen from time to time over the next minute.
- With the screen clear, try a normal setting. If 1c2c returns, phone us.
What our technician does for 1c2c
- Test the interface and its wiring where they sit
- Run the same circuit checks used for 1c1c
- Quote any part in writing first
How to keep 1c2c from coming back
- Wipe the panel dry after cleaning and let it air out before using the oven.
- Avoid pressing hard or with a fingernail on the touch pads.
- Keep a damp dishcloth away from the panel edges while the oven cools.
Technical reference
- Code
- 1c2c
- Appliance
- Whirlpool wall oven
- Control family
- Whirlpool wall ovens with a keypad, e.g. WOC54EC7HS and WOS72EC7HS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show 1c2c
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool wall oven error codes
1c2c questions
Is 1c2c a separate problem from 1c1c?
The pointer is the same, the keypad, the interface or the wiring, but they are distinct codes. Each one gets the same circuit test, so a repeat of either leads to the same checks.
Could moisture or spray cleaner upset the keypad?
It can. Wipe the panel dry, and should 1c2c still come back, the circuit needs a thorough check. Do not aim sprays at the panel; a slightly damp cloth does the job.
Will the cause be explained before any repair?
Yes. We test, explain in plain words, and write down the price before beginning. A 30-day workmanship warranty covers the repair.
Can a restart make 1c2c go away permanently?
It can clear a one-time glitch. If the code returns, the interface or its wiring still has a problem, and another restart only delays the test.
What should I tell the technician about 1c2c?
Give the model, say whether presses register slowly or not at all, and mention any cleaning spray used near the panel. Those details point toward the keypad or its link.
Need help with 1c2c?
We trace the cause in your home first and write the price down before any part is swapped.
