(813) 565-3059 Book a Repair
Whirlpool wall oven error code

Whirlpool Oven Message “Feature Not Available”

The scrolling Feature Not Available message on a Whirlpool wall oven means the oven found a problem while you programmed a cycle and could not follow your choice.

Needs attention soonChecked November 2026

What does Whirlpool wall oven code Feature Not Available mean?

While you program a cook cycle on a Whirlpool built-in wall oven, whether single, double or a microwave combination like the WOS51EC0HS, a long message starting with Feature Not Available may scroll across the display. The oven found a problem during setup and could not follow your choice. It asks you to press Enter to retry, or to remove power to clear it.

Feature Not Available at a glance

Code
Feature Not Available
Appliance
Whirlpool wall oven
Applies to
Whirlpool wall ovens with a setup message, like the WOS51EC0HS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Control that lost its place in the setup steps

What you may notice with Feature Not Available

  • A long message scrolls across the display as you program.
  • The oven declines to start the cycle you chose.
  • The display asks you to press Enter or disable power.
  • The clock display looks normal at other times.

How the wall oven detects Feature Not Available

Programming a cook cycle takes the control through a series of steps: it accepts a mode, a temperature, a time and a start. After each step it checks that the choice registered and that the oven can carry it out.

If something breaks that chain, such as a keypad entry that never registered, a control that lost its place, or wiring trouble that shows only during programming, the oven stops and scrolls the message. It invites you to press Enter to retry or to cut power. One interruption can be a glitch. A message that comes back on every attempt implicates the control or the touchpad, which is why a normal programming sequence is the best test.

Likely causes of Feature Not Available

  • Control that lost its place in the setup steps
  • Key or touch entry that never registered
  • Control or wiring problem that appears only when programming

Can you keep using the wall oven with Feature Not Available?

If the message clears after Enter or a reset and your next bake runs normally, you can keep using the oven and watch it. If it repeats on every attempt, avoid that cook mode, because the control may not be completing setups reliably. A burning smell means the breaker should go off.

What you can safely check

  1. If the oven is hot, wait for it to cool, and do not reach inside while you work.
  2. When the display offers a retry, press Enter.
  3. If the message returns, switch the oven's breaker off for one full minute and then on.
  4. Start a bake cycle and watch for a minute. If the message repeats, phone us.

What our technician does for Feature Not Available

  • Work through a normal programming sequence to find where the oven stops
  • Test the touchpad and control response
  • Quote any repair in writing first

How to keep Feature Not Available from coming back

  • Press keys firmly and one at a time while setting a cycle.
  • Keep the touchpad clean and dry, and avoid spraying cleaner directly onto it.
  • Avoid hurried key presses right after power returns.

Technical reference

Code
Feature Not Available
Appliance
Whirlpool wall oven
Control family
Whirlpool wall ovens with a setup message, like the WOS51EC0HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show Feature Not Available

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

Feature Not Available questions

Does the message mean the oven is unsafe?

The oven simply halted a setup it could not finish. Follow what the screen says, Enter or a power reset, and avoid that cook mode if the message keeps repeating until it is tested.

Why does the message show only while I am programming?

The oven checks itself as programming happens, so a control or touchpad problem can surface only then, even though an idle clock display looks normal.

Does a power reset make it go away permanently?

Only if it was a passing hiccup. Should the same message show on your next bake, the cause has not gone away and the control needs inspection.

Is this message the same as an error code?

It is a scrolling message and not a short code, but it carries the same meaning: the oven noticed a problem and could not carry out the choice. The steps shown on the screen are the first things to try.

What should I tell the technician about this message?

Say which cook mode you were setting, whether pressing Enter helped, and whether it happens every time. Those details show whether the control or the touchpad is the better place to start.

Need help with Feature Not Available?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair