(813) 565-3059 Book a Repair
Whirlpool wall oven error code

Whirlpool Wall Oven PUSH or PSH: Press Start to Continue

PUSH or PSH on a Whirlpool wall oven is a reminder to press Start and not an error; you set a function but the oven is still waiting for the Start pad.

Normal status, not a failureChecked November 2026

What does Whirlpool wall oven code PUSH or PSH mean?

On a Whirlpool wall oven such as the WOS51EC0HS, whether a single, a double or a microwave combination, PUSH or PSH is a reminder rather than a failure. It shows after you set an oven function and leave about five seconds without pressing Start. Leave it about a minute with no Start and the function is dropped, with the clock coming back on screen.

PUSH or PSH at a glance

Code
PUSH or PSH
Appliance
Whirlpool wall oven
Applies to
Whirlpool wall ovens with a Start pad prompt, like the WOS51EC0HS
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Choosing a function and never pressing Start

What you may notice with PUSH or PSH

  • PUSH or PSH appears after you choose a function.
  • The oven does not start heating until Start is pressed.
  • The function disappears and the clock returns if you wait too long.
  • Pressing Start right away makes the prompt go away.

How the wall oven detects PUSH or PSH

After you choose a function, the oven does not begin on its own. It waits for you to confirm with the Start pad, so that nothing heats by accident. If about five seconds pass without Start, the display flashes PUSH, or PSH on displays with fewer characters, as a reminder.

The prompt stays active for a while. If roughly a minute goes by with no Start, the oven treats the setting as abandoned, cancels the function and goes back to showing the time. This is ordinary behavior and not a failure. Only when the prompt stays even though you pressed Start does the touchpad come into question, because the pad may not be registering your press.

Why PUSH or PSH appears

  • Choosing a function and never pressing Start
  • A Start pad that responds slowly
  • Touchpad trouble when the prompt remains after pressing Start

Can you keep using the wall oven with PUSH or PSH?

Yes. PUSH or PSH is a reminder and the oven is working as designed. Press Start to begin, or set the function again if it was canceled. If the prompt stays after you press Start firmly several times, hold off using that function until the touchpad has been tested.

What you can safely check

  1. If you were cooking, let the oven cool before you reach in, and clear moisture from the pad area.
  2. Set the function again and press Start straight away.
  3. Press the Start pad firmly with a dry finger.
  4. If the prompt still shows, switch the breaker off for a minute and back on, then try a short bake. Need help with PUSH? Phone us if it stays.

What our technician does for PUSH or PSH

  • Test how the touchpad responds before judging the control
  • Check whether the Start pad registers every press
  • Quote any repair in writing first

How to keep PUSH or PSH from coming back

  • Press Start as soon as you have chosen the function.
  • Keep the touchpad clean and dry, and wipe it with a barely damp cloth.
  • Avoid spraying cleaner directly on the pads, since moisture can make them slow to respond.

Technical reference

Code
PUSH or PSH
Appliance
Whirlpool wall oven
Control family
Whirlpool wall ovens with a Start pad prompt, like the WOS51EC0HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show PUSH or PSH

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

PUSH or PSH questions

Is PUSH a sign that something is broken?

Not on its own; the prompt is simply nudging you toward Start. When you do press Start each time and the prompt still comes back, the touchpad deserves a test.

Where did my chosen function go?

If a minute or so passes with no Start, the oven drops the function and the time of day returns. Choose it again and hit Start promptly.

Is PSH just a shorter way of writing PUSH?

Yes, some displays hold only three characters, so PSH shows the same prompt there. It means the same thing either way, so press Start.

Can PUSH appear even after I press Start?

It should not. If PUSH stays after a firm press on a clean, dry pad, the Start pad may not be registering, and testing the touchpad is the next step.

Will PUSH go away if I do nothing?

Yes. After about a minute without Start, the oven cancels the function and the clock returns, so the prompt clears by itself. You simply set the function again.

Something else going on with your wall oven?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair