(813) 565-3059 Book a Repair
Whirlpool wall oven error code

Whirlpool Wall Oven Message “Press Cancel to Reset”: Clearing It

Press Cancel to Reset on a Whirlpool wall oven means it detected an error while running; Cancel clears it for most owners, and if Call Service follows, a power reset is next.

Needs attention soonChecked November 2026

What does Whirlpool wall oven code Press Cancel to Reset mean?

On Whirlpool wall ovens with one cavity, two, or a microwave combination, the WOD51EC0HS and WOS72EC7HS among them, the display may tell you to press Cancel to reset. The oven noticed an error as it was running. For most owners a press of the Cancel pad clears it, and if Call Service then appears, a power reset is the next move.

Press Cancel to Reset at a glance

Code
Press Cancel to Reset
Appliance
Whirlpool wall oven
Applies to
Whirlpool wall ovens with a Cancel prompt, like the WOD51EC0HS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Error that happened once during a cycle

What you may notice with Press Cancel to Reset

  • The display asks you to press Cancel to reset.
  • The running cycle stops at once.
  • Call Service may appear after you press Cancel.
  • The message may return on a later cycle.

How the wall oven detects Press Cancel to Reset

While a cycle runs, the control keeps checking itself and the circuits it manages. If it detects a condition it cannot handle, it stops the cycle and asks you to press Cancel to reset. Cancel clears the screen and ends the cycle that was running, which lets the control start fresh.

For many owners that is the end of it, because the cause was a one-time event. If the condition is still present after Cancel, the oven shows Call Service, and the next step is a full power reset at the breaker. A message that returns after that points to a control or touchpad problem that Cancel alone cannot show. The screen clears but gives no reason for the prompt.

Likely causes of Press Cancel to Reset

  • Error that happened once during a cycle
  • Touchpad or control problem that keeps returning
  • Condition that brings up Call Service after Cancel

Can you keep using the wall oven with Press Cancel to Reset?

If Cancel clears the message and the oven bakes normally afterward, you can keep using it while you watch it. If Call Service appears and returns after a power reset, stop using the oven until it has been inspected. Switch the breaker off if you notice a burning smell or unusual noises.

What you can safely check

  1. Wait for the oven to cool before you check any food.
  2. Press the Cancel pad once.
  3. If Call Service appears, switch the oven's breaker off for one full minute and then on.
  4. Start a bake cycle and watch the display for a minute. If the message returns, phone us.

What our technician does for Press Cancel to Reset

  • Inspect the control and its connections while the oven is powered down
  • Test the touchpad
  • Quote the repair in writing first

How to keep Press Cancel to Reset from coming back

  • Keep the touchpad clean and dry so key presses register properly.
  • Do not slam the oven door while a cycle is running.
  • Note what the oven was doing when the message appeared, in case it returns.

Technical reference

Code
Press Cancel to Reset
Appliance
Whirlpool wall oven
Control family
Whirlpool wall ovens with a Cancel prompt, like the WOD51EC0HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Press Cancel to Reset questions

Is pressing Cancel safe?

Yes. The oven asks for that very step, and it ends the cycle in progress. Let the oven cool before you look at the food.

What should I do when Call Service follows Cancel?

Turn the oven breaker off for a full minute, restore it, and start a bake. Should Call Service return, stop using the oven and have it inspected.

Does this only happen on newer ovens?

Not at all; older wall ovens still found in many homes can show it as well. We repair them and tell you straight when a repair would not pay off.

Does Cancel fix the cause of the message?

No. Cancel clears the screen and ends the running cycle, but it gives no clue what triggered the prompt. If the message keeps returning, the control or touchpad needs a proper test.

How does Call Service differ from Press Cancel to Reset?

Press Cancel to Reset is the first prompt, and Call Service follows only if the condition remains after Cancel. A full power reset at the breaker is the next step, and a repeat after that deserves inspection.

Need help with Press Cancel to Reset?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair