(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range 3D41: Meat Probe and Receptacle Signal

3D41 appears on a Whirlpool range when the oven control seeks the meat probe and finds no secure connection. The receptacle holds the plug, and its location depends on the model.

Low urgencyChecked November 2026

What does Whirlpool range code 3d41 mean?

On Whirlpool ranges of the freestanding or slide-in type, for example the WFE525S0HS, the control raises 3D41 after it searches for the meat probe and finds no firm connection. Like the codes close to it in this group, it centers on the receptacle that takes the plug, which is placed differently from one model to the next. In everyday use, a probe setting will not run while 3D41 remains on the display.

3d41 at a glance

Code
3d41
Appliance
Whirlpool range
Applies to
Whirlpool meat probe receptacle codes, WFE525S0HS ranges
Type
Low urgency
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The probe not inserted all the way

What you may notice with 3d41

  • The probe setting will not run
  • 3D41 stays up on the display
  • Cooking by the clock still works
  • The plug seems to sit in place but the code remains

How the range detects 3d41

The meat probe is a small thermometer on a cord. When you pick a probe setting, the control watches the receptacle for the signal that says a probe is connected, then follows the food temperature it reports. That signal has to be present before the cook is allowed to start.

When the control searches for the signal and finds nothing usable, it displays 3D41 and will not run the probe setting. A plug that has not seated is the easy cause. Beyond that are a cord that has worn at the bend near the plug, a tip that has been damaged, and receptacle contacts that have loosened or collected residue. A returning code tells us the probe path itself needs a test, not only another push of the plug.

Likely causes of 3d41

  • The probe not inserted all the way
  • A worn probe lead
  • Contact problems in the receptacle inside the oven

Can you keep using the range with 3d41?

The oven is fine for regular baking in most cases, because this code involves the probe and not heat. Cook by time instead, and check the food yourself. Do not reach into the cavity while it is hot to fiddle with the plug. If normal baking also shows trouble, switch the range off.

What you can safely check

  1. Let the oven cool all the way before you touch the probe.
  2. Push the probe plug back into the receptacle until it will go no further.
  3. Switch the range off at the breaker for a minute, then on, and read the display a minute later.
  4. If the code persists, cook without the probe and call us.

What our technician does for 3d41

  • Test the probe lead, the plug end and the receptacle separately
  • Check the probe path for a poor contact
  • Replace the part that fails its test

How to keep 3d41 from coming back

  • Remove the probe after every cook and wipe it clean once cool, rather than leaving it to bake in.
  • Keep a gentle curve in the cord when you insert it, and avoid sharp bends near the plug.

Technical reference

Code
3d41
Appliance
Whirlpool range
Control family
Whirlpool meat probe receptacle codes, WFE525S0HS ranges
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

3d41 questions

Why are there several probe codes on my range?

The control words the same kind of trouble in more than one way. Each variant leads us to the probe and the receptacle, and we write down the one on your display.

Should the probe stay in the oven all the time?

No. Put it in just for probe cooking and take it out afterward, since heat and spills wear the lead out and a cord left hanging in a hot oven suffers.

Is an older oven worth the repair?

We repair ranges of any age, and when a probe repair does not make sense for yours we say so. You get a written price in place of a guess.

Will 3D41 go away after I reseat the plug?

If the plug was simply not seated, reseating it may be all that was needed. If the probe or receptacle is worn, the code reappears the next time you try a probe cook.

Does 3D41 affect the cooktop burners?

The code concerns the oven probe, not the cooktop. The burners should behave as before, but if the display acts strangely beyond this code, switch the range off at the breaker and have it checked.

Need help with 3d41?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair