Whirlpool Range with 4D42: High Cooling Fan Speed Report
A Whirlpool range shows 4D42 when its cooling fan appears to run above the expected speed. Airflow, the fan, or the wiring that runs it is the likely source.
What does Whirlpool range code 4d42 mean?
On Whirlpool ranges that are freestanding or slide-in, gas or electric, the WFG515S0ES being one, 4D42 appears when the cooling fan looks too fast to the control. Three places are named: airflow restriction, the oven cooling fan, and the wiring that drives it. Owners hear a fan that sounds strong or keeps on running, and a cycle may stop while 4D42 shows.
4d42 at a glance
- Code
- 4d42
- Appliance
- Whirlpool range
- Applies to
- Whirlpool cooling fan speed on freestanding gas and electric ranges
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Poor airflow around the range
What you may notice with 4d42
- A strong fan sound that does not settle
- The fan stays on long after you finish
- 4D42 appears on the oven display screen
- A cycle stops while the code is showing
How the range detects 4d42
A range cools its electronics with a fan, and the control keeps track of how fast the fan spins. In normal work the fan speeds up when the oven gets hot and slows once the heat has gone. The control keeps a picture in mind of what speed fits the moment.
When 4D42 appears, the fan is faster than that picture allows. The cause may be outside the fan, since a restriction in the airflow makes the parts run warmer and the control calls for more cooling. It may also be the fan itself or the harness and plugs that feed it. The display states only that the speed is off. A careful check of airflow, then fan speed, then wiring separates the possibilities, and the oven may stop a cycle while that work is pending.
Likely causes of 4d42
- Poor airflow around the range
- A cooling fan running too fast
- The harness and plugs serving the fan
Can you keep using the range with 4d42?
Short, careful use is possible if one reset clears 4D42 and the fan sounds normal. A fan that stays strong with the code showing deserves a stop, because it suggests the range is fighting heat or the fan is misbehaving. If the code returns, leave the oven off until it has been inspected, and switch off at once if you notice a hot smell.
What you can safely check
- Stop cooking, switch the range's breaker off, and wait for the range to cool fully.
- Make sure the vents are clear.
- After a minute, switch the breaker on and see whether the screen stays clear.
- Run a short bake and listen to whether the fan sounds normal. If 4D42 comes back, call us.
What our technician does for 4d42
- Check airflow around and through the range
- Test the fan speed
- Check the harness and plugs that run the fan
How to keep 4d42 from coming back
- Leave space around the range and keep the vents clear so the fan has an easy path for air.
- Brush dust off the visible vent grilles regularly, with the range cool and switched off.
Technical reference
- Code
- 4d42
- Appliance
- Whirlpool range
- Control family
- Whirlpool cooling fan speed on freestanding gas and electric ranges
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool range error codes
4d42 questions
What separates 4D42 from 4D41?
Both mean the fan seems too fast and both are separate reports. The first checks are the same, so the number on your display only tells us where to begin.
Does a fan that keeps running after baking mean trouble?
Not by itself, because cooling fans commonly run on after a cycle to bring the oven down. A fan that stays loud while the code is displayed deserves a closer look.
What happens during a visit for 4D42?
Airflow comes first, followed by tests of the fan and its wiring while the range is disconnected. You see a written price before we order any part.
Will 4D42 clear on its own?
A single reset may clear a passing condition, but a restricted airflow path or a weak fan will bring the code back. If it returns, the airflow and fan need testing.
Could heat in a Florida kitchen trigger 4D42?
A hot, stuffy kitchen can make cooling harder, but we cannot say it is the cause here. We check the airflow, fan and wiring first, and mention room conditions if they look relevant.
Need help with 4d42?
We trace the cause in your home first and write the price down before any part is swapped.