(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range Showing 1C31: Oven Control Board and Wiring

Seeing 1C31 on a Whirlpool freestanding or slide-in range means the oven control, or the wiring that feeds it, needs a look. Expect heating to stop, a bake that will not start, or a cycle that ends early.

Stop using it until checkedChecked November 2026

What does Whirlpool range code 1c31 mean?

Whirlpool ranges of the freestanding or slide-in type, such as the WFG515S0ES or the WFE515S0ES, display 1C31 once the oven control or its wiring needs a look. Because the control decides when to heat, the oven might quit heating, decline to start, or finish a cycle ahead of time. The screen reads just 1C31, and it never says which part of the control is responsible.

1c31 at a glance

Code
1c31
Appliance
Whirlpool range
Applies to
Whirlpool freestanding and slide-in ranges such as the WFG515S0ES
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
A failing or erratic oven control board

What you may notice with 1c31

  • 1C31 stays on the range display
  • The oven stops heating or will not start
  • A bake ends earlier than it should
  • No message says which part is involved

How the range detects 1c31

The oven control is the part of the range that decides when the oven should heat. It also keeps an eye on its own circuit and on the lines that feed it. If something there looks wrong, the control reports 1C31.

Because the report comes from the control itself, the display cannot say whether the board, a plug or a wire is responsible. Heating may stop, a bake may not begin, or a cycle may end early. A breaker reset may bring the oven back, yet if 1C31 returns, the control or its harness has to be tested rather than guessed at. Connectors and the supply to the control are inspected before a board is suggested.

Likely causes of 1c31

  • A failing or erratic oven control board
  • Wires and plugs that feed power and signals to the control

Can you keep using the range with 1c31?

Reset the breaker once and run a short bake. If 1C31 stays away and the oven heats, you can keep using it while watching for a repeat. A returning code calls for putting the oven aside until it has been inspected, since the control that manages heating is the part reporting the problem. Cooktop burners may run separately, but that cannot be promised. On a gas range, a gas smell means you leave the home immediately.

What you can safely check

  1. Switch the range off at its breaker and let sixty seconds pass.
  2. Turn the breaker on.
  3. Start a bake cycle.
  4. Watch the display over the next minute for 1C31.
  5. If a gas range ever gives off a gas smell, leave the house, avoid switches, and call the gas utility from outside.

What our technician does for 1c31

  • Inspect the connectors and plugs serving the oven control.
  • Check the supply reaching the control.
  • Test the oven control board before recommending replacement.

How to keep 1c31 from coming back

  • Avoid pushing the range tightly against the wall when moving it, so wires and plugs behind it are not strained.
  • Note the date and any power flicker when the code first appeared, since that history helps the diagnosis.

Technical reference

Code
1c31
Appliance
Whirlpool range
Control family
Whirlpool freestanding and slide-in ranges such as the WFG515S0ES
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c31 questions

Does 1C31 mean the control board must be replaced?

Not always. A loose connection at the plug can produce the same message, so the wiring and the board both get inspected before we recommend anything, and the price is written down first.

Should I keep baking if 1C31 returns after a reset?

No. After one reset and a short test, a returning 1C31 means stop using the oven until it has been inspected. The cooktop burners may run on their own circuit, but that cannot be promised.

Does this code mean the oven is unsafe?

The code itself is not a danger alarm, but the control manages heating, so we treat it with care. Stop using the oven if it returns after a reset.

Is 1C31 related to the other 1C codes?

They are neighbors that point to the oven control area, but each is a separate report. The display shows which one your range raised, and we read that exact code before choosing what to test.

Will 1C31 clear by itself?

A momentary power dip or loose contact can set the code once, and it may not return. If it does come back, the control or its wiring has a lasting problem and needs testing.

Need help with 1c31?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair