(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range Reading 1C7C: Oven Control Wiring and Power Check

Ranges of the freestanding or slide-in type from Whirlpool show 1C7C to name the oven control or its wiring. The control may hold the oven back from heating until the power is cycled.

Stop using it until checkedChecked November 2026

What does Whirlpool range code 1c7c mean?

Whirlpool ranges in the freestanding and slide-in styles, gas or electric, use 1C7C to point at the oven control or its wiring. Ranges such as the WFE525S0HS and WFG515S0ES carry this code. When 1C7C appears, the control is signaling that its circuit is behaving oddly, and it may hold off heating until the power is cycled. The code remains on the screen.

1c7c at a glance

Code
1c7c
Appliance
Whirlpool range
Applies to
Whirlpool oven controls on the WFE525S0HS and WFG515S0ES
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
The oven control board

What you may notice with 1c7c

  • 1C7C remains on the range display
  • The oven has stopped heating altogether
  • The oven will not start a bake
  • Nothing on the screen names a part

How the range detects 1c7c

On the control board the oven's heating decisions are made, and the same control watches that its own circuit and the power reaching it look sound. When it finds a problem, it holds back heating and shows 1C7C, and the screen keeps displaying the code until the power is cycled and the cause clears.

A reset gives no information about which part is behind it. The oven control board, the harness wires and plugs, or the power feeding the board can each trigger the code. Problems in the power reaching the control can come from a plug, a breaker or an outlet, so the supply is tested along with the control. Plugs and harness are checked first because they are quicker to rule out. If heating does not come back after a reset, the oven needs inspection.

Likely causes of 1c7c

  • The oven control board
  • The wire harness and plugs leading to the control
  • Power reaching the control board

Can you keep using the range with 1c7c?

Try a reset and one short bake. If the oven heats and 1C7C stays away, you can use the range while watching for a repeat. If the code returns, stop baking, because the control may hold back heating until it is inspected. On a gas range, if you smell gas, leave the house and call the gas utility from outside.

What you can safely check

  1. At the panel, flip the range's breaker off and leave it for sixty seconds.
  2. Flip it back on.
  3. Stand by the range for a minute with the display in view.
  4. Bake briefly to see that the oven heats.
  5. When 1C7C returns, stop baking and call us.
  6. On a gas model, never ignore a gas smell: get everyone outside and call the gas utility from there.

What our technician does for 1c7c

  • Inspect the plugs and the harness ahead of the board.
  • Check the power feeding the control board, including the outlet or breaker supply.
  • Test the oven control board last.

How to keep 1c7c from coming back

  • Note whether lights flickered or a breaker tripped near the time 1C7C appeared, since power trouble is part of the picture.
  • Keep a record of the date and what the oven was doing, which helps us test the right thing first.

Technical reference

Code
1c7c
Appliance
Whirlpool range
Control family
Whirlpool oven controls on the WFE525S0HS and WFG515S0ES
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c7c questions

Is it linked to 1C7C that my oven quit heating?

They very likely are. When the control reports a problem it may hold back heating, and a power cycle can restore it. If heat does not come back after a reset, the oven needs inspection.

Can an outlet or breaker problem lead to 1C7C?

A problem with the power arriving at the control is one possible piece of the picture, so we check the supply too. We test instead of guessing.

Is a control repair covered by a warranty from you?

Yes, the work carries our 30-day workmanship warranty. You see the price in writing before any work starts, and that includes a replacement control.

Will 1C7C go away after a reset?

Possibly, but the reset tells us nothing about the part behind it. If heat does not return or the code comes back, the board, the harness or the power feeding the board needs testing.

What does the supply check involve?

We check the power arriving at the control as well as the board itself, since trouble reaching the control is part of the picture. That keeps us from replacing a board when the supply was the issue.

Need help with 1c7c?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair