Whirlpool Range Display Shows 1C4C: Oven Control Wiring Message
On a Whirlpool freestanding or slide-in model, 1C4C is a message from the oven control that its own circuit or wiring is not right. Gas and electric ranges both show this code.
What does Whirlpool range code 1c4c mean?
1C4C appears on Whirlpool freestanding or slide-in ranges, for example the WFG515S0ES or the WFE515S0ES, when the oven control or its wiring has something to report. Think of it as the control saying that its own circuit is off. While 1C4C stays on the display, the oven may stop heating or decline to start. Both gas and electric ranges use this code.
1c4c at a glance
- Code
- 1c4c
- Appliance
- Whirlpool range
- Applies to
- Whirlpool ranges such as the WFG515S0ES and WFE515S0ES
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- The oven control board and its own circuit
What you may notice with 1c4c
- 1C4C stays on the range display
- The oven stops heating partway through a bake
- The oven refuses to start a cycle
- The oven stays dead after the breaker reset
How the range detects 1c4c
The control that runs the oven keeps tabs on its own circuit. If it spots a problem in that circuit, or in the wiring it depends on, it reports 1C4C on the display. The code names no part, so it reads like a message rather than a diagnosis.
Behind the message there are three suspects: the oven control board, the wires joining the control to other parts of the range, and connector contacts that have loosened over time. Each can leave the oven unable to heat or start, with the code staying on screen. Plugs and harness routing are examined before the board itself because they are quicker to rule in or out. A reset at the breaker can pass a one-time event; a return of 1C4C shows the cause is still there.
Likely causes of 1c4c
- The oven control board and its own circuit
- Wires linking the control to other range parts
- Connector contacts that loosened as the range aged
Can you keep using the range with 1c4c?
Try one reset and a normal bake. If heating returns and 1C4C stays away, you can keep using the oven while watching for a repeat. If the oven stays dead or the code returns, stop using the oven and have us test the control and its wiring. Gas ranges add one rule: any gas smell means leave the house and call the gas utility from outside.
What you can safely check
- Go to the breaker panel and shut the range off for a minute by the clock.
- Switch it back on.
- Keep an eye on the display for a minute, watching for 1C4C.
- Begin an ordinary bake to confirm the oven heats again.
- If the oven stays dead, or the code reappears, stop using the oven and call us. On a gas range, a gas odor means outside first, then the gas utility.
What our technician does for 1c4c
- Examine the plugs and how the harness is routed before judging the board.
- Test the oven control board.
- Check connector contacts for looseness.
How to keep 1c4c from coming back
- Do not keep resetting the range at the breaker after the code returns; note when it appears instead.
- Keep strain off wires and plugs behind the range when sliding it out for cleaning.
Technical reference
- Code
- 1c4c
- Appliance
- Whirlpool range
- Control family
- Whirlpool ranges such as the WFG515S0ES and WFE515S0ES
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool range error codes
1c4c questions
How much does 1C4C reveal about the cause?
It narrows things to the control and its wiring and nothing more. A dead board is not what the code says, so we test connections before suggesting a replacement.
The oven works again after a reset, so is the matter closed?
Possibly. Use the oven normally for several uses. If 1C4C stays gone, it was likely a single episode; if it comes back, the cause is still present and should be checked.
Are the burners affected by 1C4C?
Many ranges keep the burners apart from the oven control, though that cannot be promised for your model; stop if anything else acts oddly.
Do gas and electric ranges both show 1C4C?
Yes, both use this code, and it points to the oven control and its wiring in either case. Gas ranges also get gas safety steps added to the checks.
Will 1C4C go away without a repair?
A one-time event can pass after a reset. If the code returns, the cause is still present, and the control, the wiring or a loose connector needs testing.
Need help with 1c4c?
We trace the cause in your home first and write the price down before any part is swapped.