(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range Error 1C6C: Oven Control Circuit or Wiring Report

Whirlpool freestanding or slide-in ranges show 1C6C when the control has noticed trouble within its own circuit, or in the wiring that it depends on. The oven may refuse to heat or stop early.

Stop using it until checkedChecked November 2026

What does Whirlpool range code 1c6c mean?

The WFE515S0ES, the WFG525S0HV and other Whirlpool freestanding or slide-in ranges display 1C6C when the control flags trouble in its own circuit or in wiring that it depends on. It belongs to the family of 1C codes but is a separate report. The oven may not heat, may stop a cycle early, or may hold the code while the stovetop is used for cooking.

1c6c at a glance

Code
1c6c
Appliance
Whirlpool range
Applies to
Whirlpool ranges such as the WFE515S0ES and WFG525S0HV
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
The oven control board's circuit

What you may notice with 1c6c

  • 1C6C sits on the range display
  • The oven will not heat as expected
  • A cycle ends earlier than you set it
  • The stovetop may still be usable while the code stays

How the range detects 1c6c

The control inside the range is a small computer that decides when the oven heats. It checks its own circuit and the wiring it depends on, such as the harness and connectors leading to it. When the control finds a problem in either place, it displays 1C6C.

The code does not name a burned part, so the display gives no way to say whether the board or a connector is responsible. The oven can decline to heat, end a cycle early, or hold the code while the stovetop keeps working for cooking. A reset may mask a control that is on its way out for a short time, which is why a return of 1C6C is never ignored. The harness and the supply to the board are tested before a new board is suggested.

Likely causes of 1c6c

  • The oven control board's circuit
  • Harness and connectors that lead to the control

Can you keep using the range with 1c6c?

Try one reset and a short bake. If the oven heats and 1C6C stays away, you can use the range, though a reset can mask a weakening control for a short while, so keep watching. If the code returns, stop using the oven and have it tested. On a gas range, any gas smell means leave the house and use the gas utility's line from outside.

What you can safely check

  1. Open the breaker panel, switch off the range's breaker and wait for a full minute.
  2. Switch it back on.
  3. Keep the display in view for a minute.
  4. Bake briefly to confirm the oven behaves normally.
  5. On a gas range, treat any gas odor as urgent: leave the home, avoid light switches, and contact the gas utility from outside.

What our technician does for 1c6c

  • Test the harness and the supply to the control board.
  • Inspect the connectors leading to the control.
  • Test the board only after the wiring checks out.

How to keep 1c6c from coming back

  • Make a note each time 1C6C appears and what the oven was doing, so a repeating pattern shows up.
  • Do not rely on resetting the range repeatedly; a returning code is the sign to have the control tested.

Technical reference

Code
1c6c
Appliance
Whirlpool range
Control family
Whirlpool ranges such as the WFE515S0ES and WFG525S0HV
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c6c questions

How do I know whether 1C6C was a one-off glitch?

Cook as usual for several days. If 1C6C stays away, it was likely a glitch; if it returns, the control needs testing.

Do all 1C codes need the same repair?

No. They aim at related areas of the control, yet each one is its own report. We start from the exact code on your display and let it decide which tests come first.

Are gas ranges handled differently?

The control tests do not change, but gas models get extra safety steps. A gas odor means you step outside and phone the gas utility from there.

Is 1C6C related to the other 1C codes?

They are relatives, since all of them point to the control area. Each is a separate report, so the exact code on your display matters when we plan the tests.

Will 1C6C come back after a reset?

It can. A reset may quiet a weakening control only briefly, so a return of the code means the control or its harness needs testing.

Need help with 1c6c?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair