(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range “Feature Not Available” Notice

A scrolling Feature Not Available notice on a Whirlpool range means a problem was found partway through programming a cycle. The display offers Enter to try again or a power disconnect to clear it.

Needs attention soonChecked November 2026

What does Whirlpool range code Feature Not Available mean?

Certain Whirlpool ranges (freestanding or slide-in, gas or electric), among them the WFE515S0ES and WFG525S0HV, show a scrolling Feature Not Available notice across the display as you program a cook cycle. The range hit a problem midway through your entry. The display then prompts you to press Enter for another try or to cut power to clear it. No part is named, so testing finds the cause.

Feature Not Available at a glance

Code
Feature Not Available
Appliance
Whirlpool range
Applies to
Whirlpool freestanding and slide-in gas and electric ranges
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A one-time slip in your entry or the control

What you may notice with Feature Not Available

  • A message scrolls across the display while you program a cycle
  • The display asks you to press Enter or disable power
  • The cycle does not start as you entered it
  • The message returns when you pick the same mode

How the range detects Feature Not Available

While you enter a cooking mode, the range checks each function you ask for against what it can currently do. If the control finds a problem with a function partway through your entry, it stops and scrolls a message across the display instead of beginning the cycle. The words on screen are a message, not a numbered code, and they do not name which function or part was involved.

The display offers two ways out. Pressing Enter lets the control try the entry again, which clears a one-time slip. If the message stays, disabling power at the breaker for a minute makes the control start fresh. When the same cycle type brings the message back each time, the cause may be a wiring or sensor input that is read wrongly during setup, or the control board itself, and only testing can tell which.

Likely causes of Feature Not Available

  • A one-time slip in your entry or the control
  • Control board reacting to the cycle you programmed
  • Wire or sensor input misread while the cycle was set up

Can you keep using the range with Feature Not Available?

If Enter or a breaker restart clears the message and the oven cycles normally, you can keep cooking. If it returns on the same cycle, avoid that cycle and use the modes that still work, or stop using the oven until it is checked. The message does not by itself mean danger. On a gas model, any gas smell means leaving the home and calling the utility from outside.

What you can safely check

  1. Make sure all burners are off and the oven is cool before you go to the breaker panel.
  2. Press Enter when the display offers another try.
  3. If the notice stays, switch the range's breaker off for one minute and back on.
  4. Start a bake.
  5. Watch the oven for a minute to see that the notice does not return.
  6. When it returns on the same cycle, write down which one and call us.

What our technician does for Feature Not Available

  • Note which cycle brings the message up and test that circuit
  • Check the control board and its connectors for the function that reported the problem
  • Quote any repair after testing identifies which part is responsible

How to keep Feature Not Available from coming back

  • Enter cycle settings steadily and wait for the display to accept each step.
  • Avoid pressing several keys together while programming a cycle.
  • Note which cycle triggers the message so a repeat is easy to describe.

Technical reference

Code
Feature Not Available
Appliance
Whirlpool range
Control family
Whirlpool freestanding and slide-in gas and electric ranges
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Feature Not Available questions

Which key do I press when the notice scrolls?

Enter, as the display suggests, to try again. Should the notice keep scrolling, cut power at the breaker for a minute and restore it. Neither step needs tools.

Is the oven dangerous when this appears?

The notice means a problem was found while programming, not that the oven is unsafe. If it repeats, avoid that cycle. A gas smell is separate: leave the home and call the utility.

Are older ranges with this message repairable?

Yes. Age does not stop a repair, and an honest word comes with the written price when a repair is not worthwhile.

Will this message go away by itself?

A one-time slip may clear with Enter or a breaker restart. If it keeps appearing on the same cycle type, something in that circuit is being read wrongly and needs testing.

Is it the same as a numbered error code?

No. It is a scrolling message and not a numbered code, so it does not point to a named part. We find the cause by watching which cycle brings it up and testing that circuit.

Need help with Feature Not Available?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair