(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range and Wall Oven F03: Electronic Control Reset

F03 on a Whirlpool range or wall oven points at the electronic oven control and its wiring, not at a sensor or the door. The guidance given is a breaker reset.

Needs attention soonChecked November 2026

What does Whirlpool range code F03 mean?

F03 can appear on Whirlpool ranges, freestanding or slide-in (the WFE515S0ES is one), and on wall ovens installed in cabinets, such as the WOC54EC7HS and WOS51EC0HS. A breaker reset is the guidance, and it names the electronic oven control and its wiring. So the code concerns the oven's brain and its connections, not a sensor or the door. Expect the code on screen and an oven that may stall until the control recovers.

F03 at a glance

Code
F03
Appliance
Whirlpool range
Applies to
Whirlpool F03 electronic oven control on ranges and wall ovens
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The electronic oven control board itself

What you may notice with F03

  • F03 appears on the oven control display
  • The oven stops working or will not start
  • Keys and the display may respond oddly
  • The code returns after a breaker reset

How the range detects F03

The electronic oven control is a circuit board with the job of running everything about baking and broiling. It reads the keypad, the sensors and the door, then switches elements or burners on and off. It also monitors itself, along with the connections that feed it.

F03 is a message from that monitoring, and it places the problem with the control or its wiring and away from a sensor or the door. A power glitch can leave a control confused, so the breaker reset comes first. If the code repeats after it, the control is tested before replacement is even discussed, and the wiring and connectors are inspected first because they cost far less than a board.

Likely causes of F03

  • The electronic oven control board itself
  • A wire or connector leading into the control
  • A power glitch that left the control confused

Can you keep using the range with F03?

If a reset clears F03 and the oven heats normally, careful use is reasonable. If the code returns, leave the oven off until it has been tested, since the control may be unable to run a cycle properly. A power event can cause a one-time code, but a repeat usually means something real. Keep the cooktop in mind as a separate circuit that may keep working.

What you can safely check

  1. Switch the oven off and let it cool. Then flip the breaker serving the range or wall oven off for a minute.
  2. Flip it back on.
  3. Give it a minute and see whether F03 returns.
  4. A short bake confirms the oven works. A repeat means leaving the oven off and calling us.

What our technician does for F03

  • Check the wiring and connectors before the control
  • Test a control that repeats the code before deciding to replace it
  • Quote the price in writing before ordering the control

How to keep F03 from coming back

  • Use surge protection on the oven circuit, since storms and brownouts can upset an electronic control.
  • Keep water and steam away from the control panel when you clean around the oven.

Technical reference

Code
F03
Appliance
Whirlpool range
Control family
Whirlpool F03 electronic oven control on ranges and wall ovens
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F03 questions

Is a new control the automatic answer to F03?

No. A loose wire, or a glitch in the power supply, can produce the same code a failing board would, so testing comes before any talk of replacement.

Why is the control the last thing replaced?

Because it is the costliest part. Tests confirm the cause first, and if a new one is needed, the price is agreed with you before it is ordered.

Could an outage explain F03?

A brownout or voltage surge can leave a control confused, which is why the breaker reset comes first. If the code never returns afterward, the cause was probably a single event.

Is F03 the same as other control codes?

Several control codes name the same areas without explaining how they differ. We treat each separately and test the oven on site to find what is behind it.

What should I tell you about F03 on the phone?

Give us the model number if you can find it, mention any recent power outage or storm, and say whether the breaker reset cleared the code even for a short while.

Need help with F03?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair