Whirlpool Refrigerator CoolingOff (COOLING OFF): Turn Cooling Back On
COOLING OFF means the cooling function on a Whirlpool side-by-side or French-door refrigerator has been switched off, so neither compartment cools. It is a setting, and it can usually be reversed from the panel.
What does Whirlpool refrigerator code CoolingOff mean?
The COOLING OFF message tells you the cooling function has been switched off. It shows on Whirlpool side-by-side refrigerators with a door dispenser (WRS325SDHZ, WRS571CIHZ) and on French-door bottom-freezers (WRF535SMHZ, WRX735SDHZ). While it is on, neither the refrigerator side nor the freezer cools, so food begins to warm. A widely used method for turning cooling back on is listed below. Model steps differ, however, and your Owner's Manual, or the Quick Start Guide, settles it.
CoolingOff at a glance
- Code
- CoolingOff
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool side-by-side and French-door refrigerators with dispenser
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Cooling turned off from the control panel
What you may notice with CoolingOff
- COOLING OFF is shown on the display
- Both the refrigerator and freezer start to feel warmer
- The compressor and fans are quiet
- Someone recently cleaned the panel or pressed buttons together
How the refrigerator detects CoolingOff
COOLING OFF is the control reporting its own state rather than a measurement. The refrigerator has a setting that turns the cooling function off, which is meant for situations such as moving the appliance or cleaning it, and while that setting is active the display says so.
With cooling off, the sealed system is not asked to run. Neither the refrigerator side nor the freezer receives cold air, and the interior temperature drifts toward the room. The control does not treat this as a failure because you, or a stray button press, asked for it. On these models the setting is toggled by pressing LOCK and MEASURED FILL together. Pressing just one may lock the dispenser or alter a different setting, so the exact simultaneous press is what matters.
Why CoolingOff appears
- Cooling turned off from the control panel
- Two panel buttons pressed at once, by accident
- A setting changed while the dispenser area was wiped
Can you keep using the refrigerator with CoolingOff?
Not with cooling off. The refrigerator and freezer stop cooling, so food warms steadily the longer the setting stays on. Turn cooling back on as soon as you see the message, keep the doors closed, and check the interior with a refrigerator thermometer once it has had time to recover. If perishables have been warm for a long stretch, follow the USDA and FDA guidance on food kept without cooling instead of judging by look or smell.
What you can safely check
- Keep the doors closed and leave the refrigerator plugged in; no breaker work is needed, and food is the thing to protect.
- Press LOCK and MEASURED FILL together, at exactly the same moment, and hold for 3 seconds.
- Look for COOLING OFF to leave the display.
- If it stays, read the method for your model in the Owner's Manual or the Quick Start Guide.
- Give the refrigerator time to start cooling and keep the doors shut while it recovers.
- If the display is normal and the inside stays warm, call us.
What our technician does for CoolingOff
- Verify the control is actually calling for cooling
- Test the cooling system if the interior stays warm with cooling on
- Explain the result and quote any work in writing
How to keep CoolingOff from coming back
- Press LOCK and MEASURED FILL only when you truly want cooling off, never while wiping the panel.
- Check the display after cleaning the dispenser area to confirm cooling is still on.
Guide for this code
Keeping a Fifteen-Year-Old Whirlpool Side-by-Side Refrigerator Cold
Read the guideTechnical reference
- Code
- CoolingOff
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool side-by-side and French-door refrigerators with dispenser
- Document
- Owner's Manual
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show CoolingOff
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool refrigerator error codes
CoolingOff questions
What is the meaning of COOLING OFF on my display?
It means someone switched the cooling function off, often by pressing two buttons together without meaning to. With it off, the refrigerator and freezer do not cool, so food warms until cooling is restored.
Which buttons bring cooling back?
One widely used method is to hold the LOCK button and the MEASURED FILL button down at once for 3 seconds. Press both in the same instant, because one alone may lock the dispenser instead. Your manual lists the exact steps for your model.
Why is the inside still warm even though cooling is on?
That points past the setting to a real cooling problem, which has to be diagnosed at the refrigerator. We put the price in writing first, stand behind our work for 30 days, and are honest when an older refrigerator does not justify the repair.
Is COOLING OFF the same as a power outage?
No. During an outage the display goes dark, but COOLING OFF is shown while the refrigerator has power. The unit is simply set not to cool, so it needs a button sequence, not electricity, to fix it.
Will COOLING OFF clear by itself?
No. The setting stays until someone turns cooling back on, which is why food keeps warming. Use the method for your model in the Owner's Manual or Quick Start Guide.
Something else going on with your refrigerator?
We trace the cause in your home first and write the price down before any part is swapped.
