(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Washer Detergent Low Message: Refill the HE Liquid Dispenser

Detergent Low on a Whirlpool front-load washer with a bulk dispenser is a refill message. Add high-efficiency liquid detergent, check the concentration setting, and the message should go away.

Normal status, not a failureChecked November 2026

What does Whirlpool washer code Detergent Low mean?

Whirlpool front-load washers fitted with a bulk dispenser, such as the WFW9150WW, flash Detergent Low on the display when that dispenser needs filling. The message is a reminder, not an error. Only high-efficiency liquid detergent belongs in the bulk dispenser, and the concentration level has to match the product you pour in, because regular detergent can stretch cycles and leave poor rinsing. Powder and single-dose packets never go into the dispenser; they are placed straight into the basket with the clothes.

Detergent Low at a glance

Code
Detergent Low
Appliance
Whirlpool washer
Applies to
Whirlpool front-load washers with a bulk dispenser (WFW9150WW)
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Bulk dispenser close to empty

What you may notice with Detergent Low

  • Detergent Low flashes on the display
  • The bulk dispenser looks nearly empty when opened
  • Suds or slow rinsing after the wrong detergent was added
  • A packet or powder residue sits in the dispenser

How the washer detects Detergent Low

A washer with a bulk dispenser stores a supply of liquid detergent and draws from it for each load. The control keeps track of how much is left, and when the supply drops to a low point it flashes Detergent Low on the display.

The message does not stop the washer or point to a broken part. It only asks you to top up the reservoir. The concentration setting tells the washer how strong your detergent is, so it can measure the right dose. If that setting does not match the product in the reservoir, the washer can deliver too much, which is why oversudsing and poor rinsing sometimes follow. Packets and powder are not measured by the dispenser at all, so they go straight into the basket.

Why Detergent Low appears

  • Bulk dispenser close to empty
  • Regular detergent used instead of high-efficiency
  • Concentration level set for a different product
  • Powder or a packet placed in the dispenser

Can you keep using the washer with Detergent Low?

Yes, you can keep washing. Detergent Low is a reminder that the reservoir needs filling, and the washer is otherwise working normally. Until you refill it, loads will not draw detergent from the bulk dispenser, so add a single-dose product to the basket if you need to wash now, and then leave the dispenser unused for that load. If the message stays after a full refill, have the level sensing tested.

What you can safely check

  1. Pause or finish the cycle and switch the washer off at the control before you open the dispenser.
  2. Fill the bulk dispenser with high-efficiency liquid detergent only.
  3. Check that the concentration level on the washer matches the detergent you poured in.
  4. Take out any powder or packet that was placed in the dispenser by mistake.
  5. Start a load. Call us if Detergent Low keeps returning right after a full refill.

What our technician does for Detergent Low

  • Test the level sensing in the bulk dispenser
  • Look for suds from wrong detergent that mimic a washer problem
  • Check the dispenser pump and lines for blockage

How to keep Detergent Low from coming back

  • Refill the bulk dispenser as soon as the message first appears
  • Use only HE liquid detergent in the dispenser and keep powder out
  • Set the concentration level to match the detergent you are using
  • Pick one method per load, dispenser or single-dose, never both together

Technical reference

Code
Detergent Low
Appliance
Whirlpool washer
Control family
Whirlpool front-load washers with a bulk dispenser (WFW9150WW)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Detergent Low questions

Is Detergent Low a breakdown?

No. It flashes when the bulk dispenser wants more detergent. Refill it with HE liquid and the message should clear. It does not mean the washer needs repair.

Can powder go in the bulk dispenser?

No. Powder and single-dose packets belong in the basket. Putting them in with the dispenser in use can oversuds the load and leave clothes poorly cleaned.

Why does the type of detergent matter?

Regular detergent can stretch cycle times and rinse badly, and an excess of any product creates oversudsing. Use only HE detergent at the strength setting that matches your bottle.

Will the message go away without refilling?

No, it stays until the reservoir has detergent again. Once you top it up with HE liquid and the washer reads the new level, the message should clear on its own with the next cycle.

What details help you when Detergent Low will not clear?

Mention your model, such as the WFW9150WW, what detergent you used and whether Detergent Low stays after a full refill. That tells us whether we are chasing suds or the level sensing.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair