(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Washer Detergent Level Indicator: Yellow Low, Red Empty

On some Whirlpool front-load washers the Detergent Level Indicator shows yellow when the cartridge is nearly empty and red when it is empty; both are refill prompts, not errors.

Maintenance reminderChecked November 2026

What does Whirlpool washer code Detergent Level Indicator mean?

Some Whirlpool front-load washers, the WFW5620HW and WFW90HEFW among them, have a Detergent Level Indicator tied to their Load and Go dispenser, in both current and older generations. Yellow means the cartridge holds detergent for just a few more cycles. Red means none remains. Neither color signals an error. The washer is prompting you to refill the cartridge.

Detergent Level Indicator at a glance

Code
Detergent Level Indicator
Appliance
Whirlpool washer
Applies to
Whirlpool front-load washers, Load and Go detergent dispenser
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
The cartridge is on its last few cycles of detergent

What you may notice with Detergent Level Indicator

  • A yellow or red light shows at the dispenser
  • The washer still runs its cycles
  • The cartridge looks low or empty when you open the drawer

How the washer detects Detergent Level Indicator

The Load and Go dispenser holds a supply of detergent in a cartridge and releases the right amount for each cycle. A level indicator beside it watches how much is left and passes that to the control.

While detergent is plentiful, the indicator stays quiet. When enough remains for only a few more cycles, it shows yellow as an early warning. When the cartridge runs dry, it shows red. Neither points to damage in the washer. They are information so you can refill before a wash goes without detergent. If you refill the cartridge but do not seat it fully, the indicator can keep showing the old level. A detergent that does not suit the dispenser, or an amount that is wrong, can give a confusing reading too.

Why Detergent Level Indicator appears

  • The cartridge is on its last few cycles of detergent
  • The cartridge is empty
  • A refill was done but the cartridge was not pushed home afterward
  • A detergent type or amount that does not suit the dispenser

Can you keep using the washer with Detergent Level Indicator?

Yes, you can keep using the washer. Yellow gives you a few more cycles, and red means the next wash will not get detergent from the cartridge until you refill it. There is no safety concern. Refill the cartridge and seat it firmly, and the indicator should return to normal.

What you can safely check

  1. Wait until the washer is idle and the drum has stopped, and switch it off if you wish, before you open the dispenser.
  2. Pull the drawer out and look at the cartridge.
  3. Refill it with the detergent type your owner's manual specifies.
  4. Press the cartridge back in firmly and shut the drawer all the way.
  5. Watch whether yellow or red still lights; if it does, contact us.

What our technician does for Detergent Level Indicator

  • Test the level sensor and the dispenser on site
  • Check the cartridge seat and drawer fit

How to keep Detergent Level Indicator from coming back

  • Refill the cartridge when the light turns yellow, so a wash never runs without detergent.
  • Use the detergent type and amount your owner's manual calls for, matched to the dispenser.

Technical reference

Code
Detergent Level Indicator
Appliance
Whirlpool washer
Control family
Whirlpool front-load washers, Load and Go detergent dispenser
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Detergent Level Indicator questions

What do the two colors tell me?

Yellow comes on when detergent for only a few more cycles remains. Red comes on when the cartridge is empty. Both are prompts to refill.

Is my washer broken when the indicator lights?

No. The indicator tracks the cartridge level and does nothing more, so yellow or red is simply a refill prompt. Refilling and seating the cartridge firmly is normally all it needs.

It stays lit even after refilling. Why?

Check that the cartridge is pushed all the way in and the drawer is shut. If the color is still there, the sensing needs a test, and that is done on site.

Can the wrong detergent confuse the indicator?

It can, since the guidance lists a detergent type or amount that does not suit the dispenser among the causes. Use what the manual calls for, and refill to the amount it describes.

Why is the light still yellow right after I refilled?

The cartridge may not be seated all the way, or the drawer may not be closed. Push the cartridge in firmly and shut the drawer. If the color stays, the sensing needs a test.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair