(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Front-Load Washer Display CL: Run the Clean Washer Cycle

CL on a Whirlpool front-load washer is a reminder and not an error: after 30 cycles it asks for the Clean Washer cycle and clears itself afterward.

Maintenance reminderChecked November 2026

What does Whirlpool washer code CL mean?

The Duet and WFW style of Whirlpool front-load washer, the WFW5620HW and WFW9150WW among them, in current and older generations, shows CL as a reminder and not an error. It comes up after 30 cycles to say that the Clean Washer cycle is due. A finished clean cycle clears it, and so do three more ordinary cycles if you skip the clean one. The washer itself is healthy when CL appears.

CL at a glance

Code
CL
Appliance
Whirlpool washer
Applies to
Whirlpool Duet and WFW front-load washers, CL reminder
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
30 cycles have passed since the last clean cycle

What you may notice with CL

  • CL appears on the display after a wash
  • The washer keeps running its normal cycles
  • A slight musty smell may be building in the drum

How the washer detects CL

A front-load washer uses small amounts of water, so detergent, lint and moisture can linger in the tub, the door seal and the drain path. Left alone, they turn into odor. To guard against that, the control counts the washes it has run since the last cleaning.

After 30 cycles it shows CL, a nudge to run the Clean Washer cycle with a cleaner made for front-load machines. The reminder is a plain count and not a sensor reading, so it says nothing about the machine's health. If you run the clean cycle, the control registers it and the code goes away. If you ignore it, the code clears after three more cycles and returns after another 30, so it never turns into a breakdown of any kind.

Why CL appears

  • 30 cycles have passed since the last clean cycle
  • The Clean Washer cycle has never been run
  • Odor or residue gathering in the tub and seal area
  • A washer working normally and only reminding you

Can you keep using the washer with CL?

Yes, keep using the washer. CL is a maintenance reminder and the machine works normally while it shows. Running the Clean Washer cycle soon helps keep odor and residue away from the tub and seal. If the washer stalls, drains slowly or smells strongly even after a clean cycle, that is a separate matter to have tested.

What you can safely check

  1. With the drum empty, the washer needs no power step; just make sure no load is inside.
  2. Run the Clean Washer cycle using a cleaner made for front-load machines, as its label directs.
  3. Leave the door slightly ajar afterward so the drum can dry.
  4. Wipe around the door seal and the dispenser.
  5. Let the code clear on its own; if CL stays, count the cycles run since and contact us.

What our technician does for CL

  • Test the washer if it stalls, drains slowly or smells after cleaning
  • Check the drain and seal area for trapped residue

How to keep CL from coming back

  • Run the Clean Washer cycle when CL appears, and leave the door slightly open afterward.
  • In Florida humidity, wipe the door seal dry so moisture does not sit in its folds.

Technical reference

Code
CL
Appliance
Whirlpool washer
Control family
Whirlpool Duet and WFW front-load washers, CL reminder
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

CL questions

Does CL mean my washer has a problem?

Not at all. It is an upkeep reminder that shows after 30 cycles. The Clean Washer cycle makes it go away, and three more ordinary cycles do the same.

Is the clean cycle compulsory?

It is recommended, since it helps keep odor and residue out of the tub, drain and hoses. Skip it and CL goes away after three cycles, then returns after another 30.

The washer still smells after cleaning. What then?

The drain, the seal and the pump may hold trapped residue. Work is quoted in writing first, and we give an honest opinion on whether a repair suits an older washer.

Will CL return once it has cleared?

Yes, after another 30 cycles. It counts washes, so it comes back on that pace whether you run the clean cycle or let the code clear itself.

Can the wrong cleaner cause trouble?

Use a product designed for front-load machines and follow its label. If you are unsure which one suits your model, the owner's manual is the place to check.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair