(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Washer F0E1: Clean Washer Cycle Found a Load in the Drum

F0E1 means the Clean Washer cycle was started while the washer senses a load inside. Empty the drum completely and start the cleaning cycle again.

Normal status, not a failureChecked November 2026

What does Whirlpool washer code F0E1 mean?

F0E1 appears when the Clean Washer cycle is started while the machine senses a load inside. On a Whirlpool all-in-one washer-dryer such as the WFC8090GX, it means items are still in the drum when cleaning begins. On Whirlpool front-load Duet and WFW washers, including the WFW5620HW, WFW9150WW and WFW90HEFW, the same code may read as F0 E1 or rL. Either way, the cleaning cycle will not run until the drum is empty.

F0E1 at a glance

Code
F0E1
Appliance
Whirlpool washer
Applies to
Whirlpool front-load washers and the WFC8090GX washer-dryer
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Clothing, a towel or a stray sock left in the drum

What you may notice with F0E1

  • F0E1 appears when you start Clean Washer
  • The cleaning cycle does not begin
  • A sock or towel sits in the drum or gasket
  • F0 E1 or rL on a front-load model

How the washer detects F0E1

The Clean Washer cycle is built to run with an empty drum, since it circulates water and cleaner to wash the tub itself. Before it begins, the washer senses whether anything is inside.

If it senses a load, it refuses to start the cleaning cycle and shows F0E1, or F0 E1 and rL on Duet and WFW models. Nothing has failed. The washer is protecting your clothes from the cleaning cycle and the cleaner from being wasted on a loaded drum. Small items often hide in the door gasket fold or behind the drum lip, so a drum that looks empty can still read as loaded. If the drum is truly empty and the code stays, the load sensing itself needs testing.

Why F0E1 appears

  • Clothing, a towel or a stray sock left in the drum
  • Clean Washer started with a load inside
  • Load sensing reading a load that is not there

Can you keep using the washer with F0E1?

Yes. F0E1 is not a warning about the washer's health, only about the cleaning cycle. Take everything out of the drum, check the door gasket folds, and start Clean Washer again. Normal wash cycles are not affected. If F0E1 stays with the drum empty, or appears on a normal wash, stop and have the load sensing tested.

What you can safely check

  1. Stop the washer and make sure the drum is still before you open the door.
  2. Take out everything in the drum, including small items in the door fold.
  3. Close the door.
  4. Restart the Clean Washer cycle with the cleaning tablet or cleaner your washer calls for.
  5. Run laundry only after the cleaning cycle ends. Call us if F0E1 stays with an empty drum.

What our technician does for F0E1

  • Test the load sensing if the drum is empty
  • Check the door gasket and drum for small hidden items
  • Confirm the Clean Washer cycle starts after the check

How to keep F0E1 from coming back

  • Empty the drum fully before you start Clean Washer
  • Run your hand around the door gasket for small items
  • Check the drum after unloading socks and small garments

Technical reference

Code
F0E1
Appliance
Whirlpool washer
Control family
Whirlpool front-load washers and the WFC8090GX washer-dryer
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F0E1 questions

Why do I see F0E1 when I run Clean Washer?

The washer senses a load in the drum and will not start a cleaning cycle with clothes inside. Empty the drum completely and start it again.

Could a sock in the door seal cause it?

Yes. Items can hide in the folds of the door gasket, so run your hand around it and look at the back of the drum before restarting.

Does F0E1 appear on a normal wash?

No, it is tied to the Clean Washer cycle. If it shows on a normal wash, the washer is reading a load it should not, and we should look at it.

Is F0E1 the same as rL?

On front-load Duet and WFW washers the same code can read as F0 E1 or rL. They mean the same thing, a load is in the drum, and the same fix applies: empty it and restart.

What do you need to know about my F0E1?

Tell us your model, such as the WFW5620HW or WFC8090GX, and say whether the drum was truly empty when F0E1 appeared. That tells us whether we are testing the load sensing.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair