Whirlpool Front-Load Washer Err Message: Request Not Accepted
Err on a Whirlpool front-load washer means a button press was refused, either because the cycle was changed while running or because Start was pressed with the door open. It is a prompt, not a failed part.
What does Whirlpool washer code Err mean?
Err is a message on Whirlpool front-load washers of the Duet and WFW series, such as the WFW5620HW and WFW9150WW, in both current and older generations. It appears in two situations: you tried to change or modify the cycle while the washer was running, or you tried to start a cycle with the door open. It is a prompt about what was pressed, not a failed part. The washer ignores the request and shows Err until you restart correctly.
Err at a glance
- Code
- Err
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool front-load washers, Duet and WFW series
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Cycle setting changed after the washer started
What you may notice with Err
- Err appears after you press a button
- The cycle does not change or start
- The door looks shut but Start is refused
- The message clears after you restart
How the washer detects Err
A front-load washer accepts only certain button presses at certain times. Once a cycle is running, the control locks in its settings, and it also expects the door to be closed before Start is accepted.
If you press a cycle change while the washer is running, or press Start with the door open, the control refuses the request and displays Err. Nothing has failed; the washer is simply telling you the press did not fit the stage it was in. The message can also appear if the door is shut but the door latch does not report closed, since the control then believes the door is still open. That is the case in which Err keeps coming back and the latch and its switch need testing.
Why Err appears
- Cycle setting changed after the washer started
- Door not fully closed when Start was pressed
- Door latch not registering closed
Can you keep using the washer with Err?
Yes. Err is a prompt, so you can keep using the washer. Close the door, pause or cancel before changing the cycle, then choose your cycle and press Start. Unplugging for 5 minutes resets the control if the message lingers. If Err keeps showing with the door shut and no cycle change, stop and have the door latch and switch tested.
What you can safely check
- Pause the washer or switch it off at the control before you touch the door or the controls.
- Close the door firmly, then press Start again.
- Do not change the cycle once it is running; pause or cancel first.
- To reset the control, unplug the washer for 5 minutes, then plug it back in.
- Choose the cycle again and start. Call us if Err shows with the door shut and no setting change.
What our technician does for Err
- Test the door switch and latch
- Check the control input that reads the door
- Confirm the door sensing reads closed when the door is shut
How to keep Err from coming back
- Pause or cancel before you change a cycle setting
- Close the door until you feel the latch catch before pressing Start
- Keep the door seal free of items that stop it from shutting
Technical reference
- Code
- Err
- Appliance
- Whirlpool washer
- Control family
- Whirlpool front-load washers, Duet and WFW series
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
Err questions
Does Err mean my washer is broken?
No, not in the ordinary case. It means a button press was not accepted, either because you changed the cycle while it was already running or because the door was open when you pressed Start.
How long should I unplug it?
Five minutes. Unplug it from the outlet, let it sit, plug it back in, then select the cycle again from the beginning and press Start with the door closed.
What if Err keeps coming back?
Then the door sensing may not read closed even when it looks shut. We test the latch and switch, find where the signal is lost, and give you a written price before repairing.
Is Err the same as a door lock error?
Not exactly. Err can appear because you changed the cycle during a run, which has nothing to do with the lock. It matches a door problem only when the door is shut and Err still shows.
What should I say if Err will not go away?
Tell us your model, such as the WFW9150WW, whether the door was shut and whether you changed anything first. If Err returns after a reset, say so. That points us at the latch.
Something else going on with your washer?
We trace the cause in your home first and write the price down before any part is swapped.