Whirlpool Laundry Center Code E4: Lid Opened During Spin
E4 on an older Whirlpool stacked laundry center washer means the lid was opened during the spin. The control stops the drum for safety, and the cycle continues once the lid is closed.
What does Whirlpool washer code E4 mean?
E4 on the washer section of an older Whirlpool stacked laundry center means the lid was opened while the machine was in its spin cycle. The control stops the drum for safety and shows E4 until the lid is shut. After you close the lid, washer operation resumes. If E4 keeps appearing with the lid down, the lid switch may not be registering that it is closed. Closing the lid squarely and clearing anything at its edge is the first step.
E4 at a glance
- Code
- E4
- Appliance
- Whirlpool washer
- Applies to
- Older Whirlpool stacked laundry center, washer section
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Lid lifted or not fully shut during the spin
What you may notice with E4
- E4 appears while the washer spins
- The drum stops turning soon after the lid lifts
- The lid sits slightly raised at one edge
- The cycle resumes after the lid is shut
How the washer detects E4
A switch under the lid tells the control whether the lid is closed. While the drum spins, the control keeps checking that switch, because a spinning drum with an open lid would be a hazard.
If the switch reports an open lid during the spin, the control stops the drum at once and shows E4. Closing the lid sends the closed signal again, and the washer resumes where it left off. The code also appears when something at the lid edge or hinge holds it slightly open, so the switch never sees it fully shut. If the lid is flat and clear but E4 keeps showing, the switch or its circuit may not be registering the closed lid, which is what we test next.
Why E4 appears
- Lid lifted or not fully shut during the spin
- Something on the lid edge or hinge holding it slightly open
- Lid switch that does not register a closed lid
Can you keep using the washer with E4?
Yes, after the lid is closed. E4 is a safety stop, not a failure, so close the lid squarely and let the cycle resume. Never reach into a spinning drum or hold the lid switch down to defeat the stop. If E4 keeps showing with the lid fully closed and nothing in the way, stop using the washer and let a technician test the lid switch.
What you can safely check
- Let the drum stop turning completely before you touch the lid.
- Close the lid firmly; washer operation will resume.
- Check that no clothing or detergent bottle keeps the lid from shutting flat.
- Wipe the rim where the lid meets the cabinet.
- Run a short spin. Call us if E4 returns with the lid fully closed.
What our technician does for E4
- Test the lid switch and its circuit
- Confirm the lid closes squarely
- Check the hinge and lid edge for anything holding it up
How to keep E4 from coming back
- Keep the lid closed while the drum spins
- Do not rest bottles or baskets on the lid edge
- Wipe the rim so soap residue does not hold the lid up
Technical reference
- Code
- E4
- Appliance
- Whirlpool washer
- Control family
- Older Whirlpool stacked laundry center, washer section
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
E4 questions
Why did E4 appear in the middle of a cycle?
The lid was lifted during the spin. The washer stops the drum for safety and waits, and closing the lid lets it carry on with the cycle where it left off.
It shows E4 with the lid down. Now what?
Check for an obstruction at the lid edge first, such as a sleeve or a bottle. If it is clear, the lid switch may not be signaling that the lid is closed, which we can test.
Is the lid switch repair worth it on an old unit?
It can be a modest repair. We quote first and say plainly if the laundry center's age makes it a poor use of your money.
Will E4 clear by itself?
Yes, in the ordinary case. Once you close the lid, the washer senses it and carries on with the cycle, and the code goes away without any other step on your part.
What helps you decide about a repeating E4?
Tell us it is a stacked laundry center showing E4, whether the lid was down and clear of items and whether the code appears at the same point in each cycle. That points us at the lid switch.
Something else going on with your washer?
We trace the cause in your home first and write the price down before any part is swapped.