(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Top-Load Washer Add Garment Light On: You May Open the Lid

While the Add Garment light is on, a Whirlpool top-load HE washer lets you pause, raise the lid and put in items; it is a status light and no error.

Normal status, not a failureChecked November 2026

What does Whirlpool washer code Add Garment Light On mean?

Whirlpool top-load HE washers in the Cabrio and WTW range, such as the WTW5105HW, WTW7500GC and WTW8500DC, carry an Add Garment status light, and older machines may flash lights and show codes besides. While it glows, you may pause the cycle, raise the lid and put items in. It is no error. It marks the stretch of time in which the washer permits the lid to open.

Add Garment Light On at a glance

Code
Add Garment Light On
Appliance
Whirlpool washer
Applies to
Whirlpool Cabrio and WTW top-load HE washers, Add Garment light
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
The washer is at a stage where adding items is permitted

What you may notice with Add Garment Light On

  • The Add Garment light is glowing on the control panel
  • The washer is mid-cycle and can be paused to open the lid
  • No error code accompanies the light

How the washer detects Add Garment Light On

A top-load washer locks its lid during parts of the cycle, so water and a spinning drum cannot reach your hands. The Add Garment light tells you when the washer is at a stage where opening the lid is allowed. It is a message from the control, not a measurement of anything wrong.

With the light on, pausing the cycle lets you raise the lid and drop in a stray sock, and the washer remembers where it stopped. Closing the lid and holding Start/Pause sends the cycle on from that point. With the light off, the washer is at a stage where the lid should stay shut, and forcing it would defeat the purpose of the lock. Older models may flash this light or pair it with display codes, but the meaning stays the same.

Why Add Garment Light On appears

  • The washer is at a stage where adding items is permitted
  • The cycle has just begun and the window is still open
  • A status signal read as if it were a warning
  • The lid opened before the light came on

Can you keep using the washer with Add Garment Light On?

Yes, nothing needs repair when the light appears during a normal wash. Use the window to add items if you like, and close the lid fully before resuming. Never force the lid open when the light is off, because the lock is there to protect you from water and a moving drum.

What you can safely check

  1. The washer works normally, and no power step is needed.
  2. Check that the Add Garment light glows.
  3. Pause the cycle, lift the lid, and drop in what you forgot, keeping it clear of the lid seal.
  4. Shut the lid completely, then touch and hold Start/Pause to resume.
  5. With the light off, wait for the next window instead of forcing the lid; if the lid will not open while the light is on, contact us.

What our technician does for Add Garment Light On

  • Test the lid lock if it will not open while the light is on
  • Check the control if the cycle will not resume after Start/Pause is held

How to keep Add Garment Light On from coming back

  • Add forgotten items as soon as the light glows, while the window is open.
  • Keep clothes clear of the lid seal when you close the lid, so it can latch fully.

Technical reference

Code
Add Garment Light On
Appliance
Whirlpool washer
Control family
Whirlpool Cabrio and WTW top-load HE washers, Add Garment light
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show Add Garment Light On

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

Add Garment Light On questions

Should the Add Garment light worry me?

No. It tells you that pausing, opening the lid and adding items is allowed right now. It is a convenience and no error code, so nothing needs repair when it glows during an ordinary wash.

How do I resume once the clothes are in?

Shut the lid fully, then touch and hold Start/Pause. The washer picks up from the point where it stopped. If it fails to resume, the lid or the control may need testing.

Are older Cabrio washers still repairable?

Yes, many keep working for years. We test first, quote in writing, and say plainly when a repair would not be worth the cost.

Why is the light off just when I want to add something?

The washer lets the lid open only at certain stages, and the light shows when. With it off, wait for the next window instead of forcing the lid, which is there to protect you.

Could a lid that will not open mean something is broken?

If the light is on and the lid still stays shut after a pause, the lid lock may need testing. A lid that opens normally with the light on is working as designed.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair