Whirlpool Top-Load Washer Lid Light Flashing: Close the Lid or Wait
A flashing Lid light on an older Whirlpool top-load HE washer may only ask you to close the lid, or it may be the short lock self-test after you touch Start. It matters if it keeps flashing.
What does Whirlpool washer code Lid Light Flashing mean?
A flashing Lid light on an older Whirlpool top-load HE washer from the Cabrio and WTW family means the lid needs to be closed. Some washers will not fill or wash with the lid open, and if it stays open about 10 minutes the washer drains. The light can also flash right after you touch Start/Pause, while the washer tests the lid lock. You hear a click, the basket turns slightly, and the lid unlocks briefly before locking again. Opening the lid during sensing restarts the sensing.
Lid Light Flashing at a glance
- Code
- Lid Light Flashing
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool Cabrio and WTW top-load HE washers
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Lid not closed completely
What you may notice with Lid Light Flashing
- The Lid light flashing after you press Start
- A click and a small basket turn
- A washer that will not fill with the lid up
- A light that keeps flashing even with the lid shut
How the washer detects Lid Light Flashing
This washer wants the lid closed before it fills, washes, drains, rinses or spins. A switch tells the control the lid position, and a lock holds it down once the cycle is running. When the lid is up, the light flashes to ask you to close it. If it stays open for about 10 minutes, the cycle is dropped and the tub drains.
The flashing also happens for a harmless reason. Right after you touch Start/Pause, the control tests the lock. It clicks the lock, turns the basket a little, lets the lid unlock for a moment and then locks it again. That sequence is quick and normal. A light that keeps flashing with the lid closed and no click means the lock or the switch is not answering the control.
Why Lid Light Flashing appears
- Lid not closed completely
- Normal lid lock self-test just after starting
- Lid opened during sensing, restarting the process
- Lid lock or lid switch circuit, if the flashing persists with a closed lid
Can you keep using the washer with Lid Light Flashing?
Yes, a brief flash while the lid closes or the lock tests itself is no reason to stop. Close the lid, press Start/Pause and let the washer run. Do not try to defeat the lid switch or lock. If the light keeps flashing with the lid closed and no test sounds, stop using the washer until the lock and switch have been tested.
What you can safely check
- Make sure the basket is not turning, and unplug the washer before you reach into it.
- Close the lid fully and press Start/Pause again.
- Listen for the click and the small basket turn that mark the lock self-test, and let it finish.
- Do not open the lid during sensing.
- If the light keeps flashing with the lid closed and you hear no test sounds, call us.
What our technician does for Lid Light Flashing
- Test the lid lock in operation
- Test the lid switch
- Check the wiring to both
How to keep Lid Light Flashing from coming back
- Close the lid fully before you press Start each time
- Avoid opening the lid during sensing so the process does not restart
- Keep lint and detergent from building up around the lid edge
- Learn the click and basket turn of the self-test so you know it is normal
Technical reference
- Code
- Lid Light Flashing
- Appliance
- Whirlpool washer
- Control family
- Whirlpool Cabrio and WTW top-load HE washers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
Lid Light Flashing questions
Is a flashing Lid light always a problem?
No. It can flash as a reminder to close the lid or during the lock self-test after Start. Wait a few seconds and close the lid. It matters only if it keeps flashing with the lid closed.
What is the lid lock self-test?
When you touch Start/Pause, the washer clicks the lock, gives the basket a small turn and lets the lid unlock briefly before locking again. It is normal and takes only a moment.
Why did my previous washer work with the lid open?
Some older washers filled and washed with the lid up. Many newer ones need it closed to fill, wash, drain, rinse and spin, and they drain after about 10 minutes of waiting.
Will the flashing Lid light stop by itself?
Yes, when the cause is an open lid or the quick self-test. Once the lid is closed and the test finishes, the light stops and the washer carries on. A light that never stops needs the lock and switch checked.
Should I lift the lid while the light is still flashing?
It is better to wait. Opening the lid during the test or during sensing makes the washer restart that step. Give it a few seconds with the lid closed, and the cycle should move on without further help.
Something else going on with your washer?
We trace the cause in your home first and write the price down before any part is swapped.