(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Front-Load Washer F22: Door Lock Will Not Close

F22 on an older Whirlpool Duet or WFW front-load washer is a door lock issue. The door must be completely shut, so look for clothing, packing or residue in the latch.

Low urgencyChecked November 2026

What does Whirlpool washer code F22 mean?

F22 on Whirlpool front-load washers of the Duet and WFW series, such as the WFW5620HW and WFW90HEFW, is an older-generation code for a door lock issue. The door must be completely shut for the washer to run. A shipping item or clothing in the latch, detergent or softener residue around the lock, or an overfull drum that keeps the door from closing can all cause F22. If the door closes cleanly and F22 stays, the lock or its signal needs a test.

F22 at a glance

Code
F22
Appliance
Whirlpool washer
Applies to
Whirlpool front-load washers, Duet and WFW series, older generation
Type
Low urgency
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Clothing or shipping material caught in the door latch

What you may notice with F22

  • F22 appears and the washer will not start
  • The door looks shut but does not click
  • Clothing sticks out near the door opening
  • Residue is visible around the lock

How the washer detects F22

A front-load washer will not fill or spin until its door is fully shut and the lock has engaged. The control commands the lock and expects a signal back confirming that the latch caught. F22 is shown when that confirmation does not arrive.

Something in the way is the simplest cause. Clothing that sticks out of the opening, a shipping item left in the latch or a drum so full that the door cannot close all keep the latch from seating. Detergent or softener residue around the lock can also stop it from sensing properly. If the door area is clear and the load is small but F22 stays, the lock mechanism or the signal that reports it may not be working, which is where testing begins.

Likely causes of F22

  • Clothing or shipping material caught in the door latch
  • Detergent or softener build-up around the lock
  • Load so large that the door cannot close fully
  • Lock mechanism

Can you keep using the washer with F22?

Only if the door closes and locks, because the washer will not run otherwise and you should never try to bypass the lock. Clear the latch area, wipe away residue and take out part of a packed load. If the washer then runs normally, you can keep using it. If F22 returns with a clear door and a small load, stop and have the lock tested.

What you can safely check

  1. Stop the washer and unplug it before you touch the door area.
  2. Open the door and check that no clothing sticks out past the opening.
  3. Remove anything blocking the latch, including packing material.
  4. Wipe the lock area with a soft, damp cloth.
  5. If the drum is packed, take out part of the load, close the door firmly and restart. Call us if F22 stays.

What our technician does for F22

  • Test how the latch engages and releases
  • Test the lock and its signal
  • Check that the door closes squarely

How to keep F22 from coming back

  • Leave room in the drum so the door closes freely
  • Check the opening for stray clothing before you shut the door
  • Wipe detergent and softener residue from around the lock now and then

Technical reference

Code
F22
Appliance
Whirlpool washer
Control family
Whirlpool front-load washers, Duet and WFW series, older generation
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F22 questions

Why would a full washer cause F22?

Clothes can press against the door and keep it from latching. Leave room for the load to tumble freely and check the door opening before you close it.

Can I clean the door lock?

Yes, gently, with a soft damp cloth and the washer unplugged. Detergent and softener residue can build up around it and stop the latch from sensing.

When do I call you about F22?

When the door is clear and the load is small but F22 stays. We test the lock and give a written price before any repair.

Is F22 the same as the Door Open symbol?

They are alike, since both mean the door will not lock. F22 is the older Duet and WFW code, while a blinking Door Open symbol appears on other washers, and the checks around the latch are similar.

Will F22 clear by itself?

Once the door closes squarely and the lock engages, the code should stop. If it keeps returning with a clear door and a small load, the lock itself needs testing.

Need help with F22?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair