Whirlpool Top-Load Washer dLO: Why the Lid Will Not Lock
dLO on a Whirlpool top-load HE washer means the lid is not locking, so the cycle will not run. A garment under the lid or soap build-up at the lock is the first thing to look for.
What does Whirlpool washer code dLO mean?
dLO appears on Whirlpool top-load HE washers of the Cabrio and WTW style, including the WTW5000DW, WTW5105HW, WTW7500GC and WTW8500DC. The guidance for these washers describes a dL message for a lid that will not lock or a lid lock that fails to respond. Either way, the washer is telling you the lid is not locked, and it will not begin or continue a cycle until it is. A sleeve or other item caught under the lid can hold it up, and detergent build-up around the lock may stop it from engaging.
dLO at a glance
- Code
- dLO
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool top-load HE washers, Cabrio and WTW style
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Piece of clothing caught beneath the lid
What you may notice with dLO
- The code dLO appears on the washer display
- The cycle will not start or carry on
- The lid closes but you hear no lock engage
- A garment edge sticks out from under the lid
How the washer detects dLO
A top-load HE washer does not start washing until it knows the lid is closed and locked. The lid lock is a small latch the control commands to lock, and the control then expects a confirming signal back that the lock actually engaged.
When that confirmation does not arrive, the washer stops and shows dLO, since spinning a basket with an unlocked lid would be unsafe. The cause may be physical, such as a sleeve under the lid or soap residue around the lock that stops it from seating. It may also be electrical, where the lock or its circuit does not report back. The washer cannot tell which one it is, so the display points only at the lid lock as a whole.
Likely causes of dLO
- Piece of clothing caught beneath the lid
- Detergent build-up around the lid lock
- Lid not coming down squarely
- Lid lock circuit not answering the control
Can you keep using the washer with dLO?
Not while dLO is showing, because the washer will not run with an unlocked lid and you should not try to bypass it. Clear the lid opening and clean around the lock, then try again. If the cycle runs normally afterward, you can keep using the washer. If dLO keeps coming back, stop and leave the lock to a technician rather than forcing the lid or reaching near the mechanism.
What you can safely check
- Stop the cycle and unplug the washer or switch off its breaker before you reach near the lid lock.
- Open the lid and look straight under it for any clothing or object.
- Push the load down and away from the lid opening.
- Wipe detergent build-up from around the lock mechanism with a damp cloth.
- Close the lid firmly and restart. If dLO returns, call us.
What our technician does for dLO
- Test the lid lock and whether it engages
- Check the circuit that signals the lock to the control
- Replace the lock if it fails the test
How to keep dLO from coming back
- Check under the lid for stray clothing before you start each load
- Wipe detergent residue from around the lock mechanism now and then
- Use only the recommended amount of HE detergent so build-up stays down
Technical reference
- Code
- dLO
- Appliance
- Whirlpool washer
- Control family
- Whirlpool top-load HE washers, Cabrio and WTW style
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show dLO
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool washer error codes
dLO questions
Why does my Cabrio washer show dLO?
The lid is not locking. The guidance points to two causes worth checking: a garment caught under the lid, or detergent build-up around the lock mechanism.
Is dL the same as dLO?
The guidance lists the code as dLO but describes dL on the display for a lid that will not lock. Both point to the lid lock, so the same checks apply.
Can you repair the lid lock on a Cabrio?
Yes. We test the lock and its circuit on site, give you the price in writing before starting, and back the finished work with a 30-day workmanship warranty.
Will dLO clear on its own?
Only if the cause was something simple, like a sleeve under the lid. Once the lid can close squarely and the lock engages, the code should stop on the next start without any other step.
What should I mention when I call about dLO?
Give us your model, such as the WTW7500GC, and say whether dLO appears right away or midway through a cycle, and whether you cleaned around the lock. That helps us plan the test.
Need help with dLO?
We trace the cause in your home first and write the price down before any part is swapped.
