(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Front-Load Washer Code rL: Items Found During Clean Washer

rL, shown as F-34 on some models, means a Whirlpool front-load washer found something in the drum during the Clean Washer cycle. Empty the drum and start the cycle again.

Maintenance reminderChecked November 2026

What does Whirlpool washer code rL mean?

rL, shown on some models as F-34, appears on a Whirlpool front-load washer from the Duet and WFW family when something is sensed in the drum during the Clean Washer cycle. That cycle is meant to run empty so the cleaner can reach the drum and the seal. If the control senses clothes or other items, it stops and shows the code. Models such as the WFW5620HW and WFW90HEFW behave this way, in current and older generations. The remedy is to take everything out and start the cycle again.

rL at a glance

Code
rL
Appliance
Whirlpool washer
Applies to
Whirlpool Duet and WFW front-load washers
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
Clothes or small items left in the drum

What you may notice with rL

  • rL or F-34 on the display when the cycle starts
  • The Clean Washer cycle stopping at the beginning
  • A sock or small item inside the door seal folds
  • An empty drum that still triggers the code

How the washer detects rL

The Clean Washer cycle is built to run with nothing in the drum. It fills the tub with water and a washer cleaner and turns the drum so the cleaner reaches the drum surface and the door seal. A load of clothes would soak up the cleaner and keep the drum from turning as the cycle expects.

To guard against that, the washer checks the weight in the drum when the cycle begins. If it senses clothes or other items, it stops and shows rL, or F-34 on some models. A sock lodged behind the gasket can do the same. Once the drum is truly empty and the cycle is restarted, the code goes away. If it returns with an empty drum, the load sensing may be reading weight that is not there, and that is the next thing to test.

Why rL appears

  • Clothes or small items left in the drum
  • Item stuck in the door seal or behind the gasket
  • Load sensing that is reading weight with an empty drum

Can you keep using the washer with rL?

Yes, rL is a notice and not a failure, so the washer is fine for normal washing. Empty the drum, check the door seal folds and start the Clean Washer cycle again. If the code returns with an empty drum after a power reset, you can still wash clothes normally, but have the load sensing tested before relying on the cleaning cycle.

What you can safely check

  1. Stop the cycle, wait for the drum to stop and unplug the washer before you open the door.
  2. Remove every piece of clothing from the drum.
  3. Check the folds of the door seal for a small item that fell behind the gasket.
  4. Plug the washer in and restart the Clean Washer cycle.
  5. If rL returns with an empty drum, cut power at the outlet for five minutes, try once more and then call us.

What our technician does for rL

  • Test the load sensing with an empty drum
  • Inspect the door seal area
  • Check the control reading

How to keep rL from coming back

  • Take every item out of the drum before you start the Clean Washer cycle
  • Look inside the door seal folds for socks and small items after each load
  • Check pockets before loading so coins and tissues do not hide behind the gasket
  • Run the Clean Washer cycle empty and with the door seal clear

Technical reference

Code
rL
Appliance
Whirlpool washer
Control family
Whirlpool Duet and WFW front-load washers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

rL questions

Is rL an error?

Not really. It is a notice that the Clean Washer cycle found something in the drum. Remove the items and restart, and the cycle should run as designed.

Is F-34 the same as rL?

Yes. Some displays show F-34 instead. Both mean items were detected during the Clean Washer cycle, and the fix is to empty the drum and run the cycle again.

What if the drum is already empty?

Look behind the door seal for a small item, then try a power reset. If rL still shows, the sensing may be reading wrongly, and it can be tested before any part is quoted.

Will rL clear by itself?

Not while something is in the drum. The cycle will keep stopping until the drum is empty. After you remove the items and restart, the cycle should run through. If rL still shows with an empty drum, the load sensing needs a test.

Can I run the Clean Washer cycle with a load?

No. The cycle is meant to run empty so the cleaner can reach the drum and seal. A load absorbs the cleaner and triggers rL. Run your clothes in a normal cycle, then start the Clean Washer cycle with an empty drum.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair